lexiara

Defined terms — Commission Regulation (EC) No 692/2008 of 18 July 2008 implementing and amending Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information (Text with EEA relevance)

European Union · 32008R0692 · 2360 provisions

29 defined in this instrument.

All provisions · All instruments

access to information — the availability of all vehicle OBD and vehicle repair and maintenance information, required for the inspection, diagnosis, servicing or repair of the vehicle 23.
bi fuel gas vehicle — a bi fuel vehicle that can run on petrol and also on either LPG, NG/biomethane or hydrogen 12.
bi fuel vehicle — a vehicle with two separate fuel storage systems that can run part-time on two different fuels and is designed to run on only one fuel at a time 11.
cold start system or device — a system which temporarily enriches the air/fuel mixture of the engine thus assisting the engine to start 30.
deficiency — in the context of the OBD system, that up to two separate components or systems which are monitored contain temporary or permanent operating characteristics that impair the otherwise efficient OBD monitoring of those components or systems or do not meet all of the other detailed requirements for OBD 24.
deteriorated replacement pollution control device — a pollution control device as defined in Article 3(11) of Regulation (EC) No 715/2007 that has been aged or artificially deteriorated to such an extent that it fulfils the requirements laid out in Section 1 to Appendix 1 to Annex XI of UN/ECE Regulation No 83 25.
emission control system — in the context of the OBD system, the electronic engine management controller and any emission-related component in the exhaust or evaporative system which supplies an input to or receives an output from this controller 18.
engine capacity — either of the following: for reciprocating piston engines, the nominal engine swept volume; for rotary piston (Wankel) engines, double the nominal engine swept volume 5.
engine misfire — lack of combustion in the cylinder of a positive ignition engine due to absence of spark, poor fuel metering, poor compression or any other cause 29.
flex fuel biodiesel vehicle — a flex fuel vehicle that can run on mineral diesel or a mixture of mineral diesel and biodiesel 15.
flex fuel ethanol vehicle — a flex fuel vehicle that can run on petrol or a mixture of petrol and ethanol up to an 85 % ethanol blend (E85) 14.
flex fuel vehicle — a vehicle with one fuel storage system that can run on different mixtures of two or more fuels 13.
gaseous pollutants — the exhaust gas emissions of carbon monoxide, oxides of nitrogen, expressed in nitrogen dioxide (NO2) equivalent, and hydrocarbons with the following ratio: C1H1,89O0,016 for petrol (E5); C1H1,86O0,005 for diesel (B5); C1H2,525 for liquefied petroleum gas (LPG); CH4 for natural gas (NG) and biomethane; C1H2,74O0,385 for ethanol (E85) 3.
hybrid electric vehicle (HEV) — a vehicle that, for the purpose of mechanical propulsion, draws energy from both of the following on-vehicle sources of stored energy/power: a consumable fuel; battery, capacitor, flywheel/generator or other electrical energy/power storage device 16.
malfunction — the failure of an emission-related component or system that would result in emissions exceeding the limits in section 3.3.2 of Annex XI or if the OBD system is unable to fulfil the basic monitoring requirements set out in Annex XI 20.
malfunction indicator (MI) — a visible or audible indicator that clearly informs the driver of the vehicle in the event of a malfunction of any emission-related component connected to the OBD system, or of the OBD system itself 19.
mass of the vehicle in running order — the mass described in point 2.6 of Annex I to Directive 2007/46/EC 28.
mono fuel gas vehicle — a mono fuel vehicle that primarily runs on LPG, NG/biomethane, or hydrogen but may also have a petrol system for emergency purposes or starting only, where the petrol tank does not contain more than 15 litres of petrol 10.
mono fuel vehicle — a vehicle that is designed to run primarily on one type of fuel 9.
original replacement pollution control device — a pollution control device or an assembly of pollution control devices whose types are indicated in Appendix 4 to Annex I to this Regulation but are offered on the market as separate technical units by the holder of the vehicle type-approval 7.
periodically regenerating system — catalytic converters, particulate filters or other pollution control devices that require a periodical regeneration process in less than 4 000 km of normal vehicle operation 6.
power take-off operation or unit — an engine-driven output provision for the purposes of powering auxiliary, vehicle mounted, equipment 31.
properly maintained and used — for the purpose of a test vehicle, that such a vehicle satisfies the criteria for acceptance of a selected vehicle laid down in section 2 of Appendix 1 to Annex II 17.
reagent — any product other than fuel that is stored on-board the vehicle and is provided to the exhaust after-treatment system upon request of the emission control system 27.
secondary air — the air introduced into the exhaust system by means of a pump or aspirator valve or other means that is intended to aid in the oxidation of HC and CO contained in the exhaust gas stream 21.
small volume manufacturers — vehicle manufacturers whose worldwide annual production is less than 10 000 units 32.
starting aid — glow plugs, modifications to the injection timing and other devices which assist the engine to start without enrichment of the air/fuel mixture of the engine 4.
type of pollution control device — catalytic converters and particulate filters which do not differ in any of the following essential aspects: number of substrates, structure and material; type of activity of each substrate; volume, ratio of frontal area and substrate length; catalyst material content; catalyst material ratio; cell density; dimensions and shape; thermal protection 8.
vehicle OBD information — information relating to an on-board diagnostic system for any electronic system on the vehicle 26.