lexiara

Defined terms — Commission Regulation (EU) 2019/2021 of 1 October 2019 laying down ecodesign requirements for electronic displays pursuant to Directive 2009/125/EC of the European Parliament and of the Council, amending Commission Regulation (EC) No 1275/2008 and repealing Commission Regulation (EC) No 642/2009 (Text with EEA relevance.)

European Union · 32019R2021 · 413 provisions

53 defined in this instrument, 1 borrowed from other acts.

All provisions · All instruments

active mode — a condition in which the electronic display is connected to a power source, has been activated and is providing one or more of its display functions (1)
all-in-one video conference system — a dedicated system designed for video conferencing and collaboration, integrated within a single enclosure, whose specification shall include all of the following features: support for specific videoconference protocol ITU-T H.323 or IETF SIP as delivered by the manufacturer; camera(s), display and processing capabilities for two-way real-time video including packet loss resilience; loudspeaker and audio processing capabilities for two-way real-time hands-free audio including echo cancellation; an encryption function; HiNA (11)
Automatic Brightness Control (ABC) — the automatic mechanism that, when enabled, controls the brightness of an electronic display as a function of the ambient light level illuminating the front of the display (9)
brightest on mode configuration — the configuration of the electronic display, set by the manufacturer, which provides an acceptable picture with the highest measured peak white luminance (23)
broadcast display — an electronic display designed and marketed for professional use by broadcasters and video production houses for video content creation. Its specifications shall include all of the following characteristics: colour calibration function; input signal analysis function for input signal monitoring and error detection, such as wave-form monitor/vector scope, RGB cut off, facility to check the video signal status at actual pixel resolution, interlace mode and screen marker; Serial Digital Interface (SDI) or Video over internet Protocol (VoIP) integrated with the product; not intended for use in public areas (13)
close viewing — a viewing distance comparable to that obtained when viewing an electronic display held in the hand or when sitting at the desk (12)
computer display — an electronic display intended for one person for close viewing such as in a desk-based environment (4)
control panel — an electronic display whose main function is to display images associated with product operational status; it may provide user interaction by touch or other means to control the product operation. It may be integrated into products or specifically designed and marketed to be used exclusively with the product (10)
digital interactive whiteboard — an electronic display which allows direct user interaction with the displayed image. The digital interactive whiteboard is designed primarily to provide presentations, lessons or remote collaboration, including the transmission of audio and video signals. Its specification shall include all of the following features: primarily designed to be installed hanging, mounted on a ground stand, set on a shelf or desk or fixed to a physical structure for viewing by multiple people; to be necessarily used with computer software with specific functionalities to manage content and interaction; integrated or designed to be specifically used with a computer for running the software in point (b); a display screen area greater than 40 dm2; user interaction by finger or pen touch or other means such as hand, arm gesture or voice (14)
digital photo frame — an electronic display that displays exclusively still visual information (7)
digital signage display — an electronic display that is designed primarily to be viewed by multiple people in non-desktop based and non domestic environments. Its specifications shall include all of the following features: unique identifier to enable addressing a specific display screen; a function disabling unauthorised access to the display settings and displayed image; network connection (encompassing a hard-wired or wireless interface) for controlling, monitoring or receiving the information to display from remote unicast or multicast but not broadcast sources; designed to be installed hanging, mounted or fixed to a physical structure for viewing by multiple people and not placed on the market with a ground stand; does not integrate a tuner to display broadcast signals (5)
disassembling — reversible taking apart of an assembled product into its constituent materials and/or components without functional damage that would preclude reassembling, reuse or refurbishment of the product (26)
dismantling — possibly irreversible taking apart of an assembled product into its constituent materials and/or components (25)
electronic display — a display screen and associated electronics that, as its primary function, displays visual information from wired or wireless sources (1)
equivalent model — a model which has the same technical characteristics relevant for the technical information to be provided, but which is placed on the market or put into service by the same manufacturer, importer or authorised representative as another model with a different model identifier (34)
External Power Supply (EPS) — a device as defined in Commission Regulation (EU) 2019/1782 (2) (7)
fire retardant — a substance that markedly retards the propagation of a flame (30)
forced menu — a specific menu, appearing upon initial start-up of the display or upon a reset to factory settings, offering a set of alternative display settings, pre-defined by the manufacturer (13)
grade-1 monitor — a monitor for high-level technical quality evaluation of images at key points in a production or broadcast workflow, such as image capture, post-production, transmission and storage (19)
halogenated flame retardant — a flame retardant that contains any halogen (31)
HiNA — borrowed from another act; this instrument states no meaning of its own (12)
homogeneous material — one material of uniform composition throughout or a material consisting of a combination of materials, that cannot be disjointed or separated into different materials by mechanical actions such as unscrewing, cutting, crushing, grinding and abrasive processes (32)
luminance — the photometric measure of the luminous intensity per unit area of light traveling in a given direction, expressed in units of candelas per square meter (cd/m2). The term brightness is often used to ‘subjectively’ qualify the luminance of a display (11)
medical display — an electronic display covered by the scope of: Council Directive 93/42/EEC (16) concerning medical devices; or Regulation (EU) 2017/745 of the European Parliament and of the Council (17) on medical devices; or Council Directive 90/385/EEC (18) on the approximation of the laws of the Member States relating to active implantable medical devices; or Directive 98/79/EC of the European Parliament and of the Council (19) on in vitro diagnostic medical devices; or Regulation (EU) 2017/746 of the European Parliament and of the Council (20) on in vitro diagnostic medical devices (18)
microLED display — an electronic display where individual pixels are lit using microscopic GaN LED technology (5)
model identifier — the code, usually alphanumeric, which distinguishes a specific product model from other models with the same trade mark of the same manufacturer’s, importer’s or authorised representative’s name (35)
network — a communication infrastructure with a topology of links and an architecture that includes the physical components, organisational principles and communication procedures and formats (protocols) (14)
network availability — the capability of an electronic display to activate functions after a remotely initiated trigger has been detected by a network interface (16)
network port — a wired or wireless physical interface, providing network connection, through which functions of the electronic display can be remotely activated and data received or sent. Interfaces to input data such as video and audio signals, but not originated from a network source and not using a network address, are not considered to be a network interface (15)
networked display — an electronic display that can connect to a network using one of its network interfaces, if enabled (17)
networked standby mode — a condition in which the electronic display is able to resume a function by way of a remotely initiated trigger from a network interface (18)
normal configuration — a display setting which is recommended to the end-user by the manufacturer from the initial set up menu or the factory setting that the electronic display has for the intended product use. It must deliver the optimal quality for the end user in the intended environment and for the intended use. The normal configuration is the condition in which the values for off, standby, networked standby and on mode are measured (6)
occupancy sensor — a sensor monitoring and reacting to the movements in the space around the product whose signal can trigger the switching to on mode. Lack of movement detection for a predetermined time can be used to switch into standby mode or networked standby mode (20)
off mode — a condition in which the electronic display is connected to the mains power source and is not providing any function; the following shall also be considered as off mode: conditions providing only an indication of off mode condition; conditions providing only functionalities intended to ensure electromagnetic compatibility pursuant to Directive 2014/30/EU of the European Parliament and of the Council (1) (2)
organic light emitting diode (OLED) — a technology in which light is produced from a solid state device embodying a pn junction of organic material. A junction emits optical radiation when excited by electric current (4)
pixel (picture element) — the area of the smallest element of a picture that can be distinguished from its neighbouring elements (21)
PMMA — PolyMethylMethAcrylate (29)
Printed Circuit Board — an assembly that mechanically supports and electrically connects electronic or electrical components using conductive tracks, pads and other features etched from one or more sheet layers of conductive metal laminated onto or between sheet layers of a non-conductive substrate (28)
product database — a collection of data concerning products which is arranged in a systematic manner and consists of a consumer-oriented public part, where information concerning individual product parameters is accessible by electronic means, of an online portal for accessibility and of a compliance part, with clearly specified accessibility and security requirements, as laid down in Regulation (EU) 2017/1369 (33)
professional display — an electronic display designed and marketed for professional use for editing video and graphic images. Its specification shall include all of the following features: a contrast ratio of at least 1000:1 measured at a perpendicular to the vertical plane of the screen and at least 60:1 measured at a horizontal viewing angle of at least 85° relative to that perpendicular and at least 83° from the perpendicular on a curved screen, with or without a screen cover glass; a native resolution of at least 2,3 mega pixels; colour Gamut support is 38,4 % of CIE LUV or greater (equivalent to greater than 99 % of Adobe RGB and over 100 % of sRGB colour space). Shifts in colour space are allowable as long as the resultant colour space is at least 38,4 % of CIE LUV. Colour and luminance uniformity shall be as required for grade 1 monitors (15)
professional repairer — an operator or undertaking which provides services of repair and professional maintenance of electronic displays (37)
projector — an optical device for processing analogue or digital video image information, in any format, to modulate a light source and project the resulting image onto an external surface (8)
reactivation function — a function that via a remote switch, a remote control unit, an internal sensor, a timer or, for networked displays in networked standby mode, the network, provides a switch from standby mode or networked standby mode to a mode, other than off-mode, providing additional functions (19)
screen area — the viewable area of the electronic display calculated by multiplying the maximum viewable image width by the maximum viewable image height along the surface of the panel (both flat or curved) (6)
security display — an electronic display whose specification shall include all of the following features: self-monitoring function capable of communicating at least one of the following information to a remote server: power status; internal temperature from anti-overload thermal sensing; video source; audio source and audio status (volume/mute); model and firmware version; user-specified specialist form factor facilitating the installation of the display into professional housings or consoles (16)
shop configuration — the configuration for use specifically in the context of demonstrating the electronic display, for example in high illumination (retail) conditions and not involving an auto power-off if no user action or presence is detected. This configuration may be not accessible through a displayed menu (24)
spare part — a separate part that can replace a part with the same function in a product (36)
standby mode — a condition where the electronic display is connected to a power source, depends on energy input from that source to work as intended and provides only the following functions, which may persist for an indefinite time: reactivation function, or reactivation function and only an indication of enabled reactivation function; and/or information or status display (3)
status display — a display used to show simple but changing information such as selected channel, time or power consumption. A simple light indicator is not considered a status display (9)
television — an electronic display designed primarily for the display and reception of audiovisual signals and which consists of an electronic display and one or more tuners/receivers (2)
touch functionality — the possibility of inputting commands using, as input device, a touch-sensitive device, that generally is in the form of a transparent film layered on top of an electronic display panel (22)
tuner/receiver — an electronic circuit that detects television broadcast signal, such as terrestrial digital or satellite, but not internet unicast, and facilitates the selection of a TV channel from a group of broadcast channels (3)
USB — Universal Serial Bus (8)
Virtual reality headset — a head-weareable device that provides immersive virtual reality for the wearer by displaying stereoscopic images for each eye with head motion tracking functions (20)