All-terrain vehicles — any motorised vehicle designed to travel on three or four low pressure (less than 0,9 bar gauge pressure) tires on unpaved surfaces, typically having a seat designed to be straddled by the operator and handlebars for steering control. All-terrain vehicles may include, for example, quad bikes, off-road vehicles, utility terrain vehicles. X.B.VIII.001 | Specific processing equipment, as follows (see List of Items Controlled): a. Hot cells; or b. Glove boxes suitable for use with radioactive materials. X.C.VIII.001 | Metal powders and metal alloy powders, usable for any of the systems listed in X.A.VIII.005.a. X.C.VIII.002 | Advanced materials as follows: a. Materials for cloaking or adaptive camouflage; b. Metamaterials, e.g. with a negative refractive index; c. Not used; d. High entropy alloys (HEA); e. Heusler compounds; or f. Kitaev materials, including kitaev spin liquids. X.C.VIII.003 | Conjugated polymers (conductive, semiconductive, electroluminescent) for printed or organic electronics. X.C.VIII.004 | Energetic materials as follows and mixtures thereof: a. Ammonium picrate (CAS 131-74-8); b. Black powder; c. Hexanitrodiphenylamine (CAS 131-73-7); d. Difluoroamine(CAS… ANNEX III

Common channel signalling — the transmission of control information (signalling) via a separate channel than that used for the messages. The signalling channel usually controls multiple message channels. 10) ANNEX III

Controlled materials — controlled energetic materials (see 1C011, 1C111, 1C239 or ML8). 2. Nitrogen trifluoride when not in a gaseous state is controlled under ML8.d by the CML. X.C.IX.007 | Mixtures not controlled by 1C350 or 1C450 (26) that contain chemicals controlled by 1C350 or 1C450 and medical, analytical, diagnostic, and food testing kits not controlled by 1C350 or 1C450 that contain chemicals controlled by 1C350, as follows (see List of Items Controlled): a. Mixtures containing the following concentrations of precursor chemicals controlled by 1C350: 1. Mixtures containing 10 % or less, by weight, of any single CWC Schedule 2 chemical controlled by 1C350; 2. Mixtures containing less than 30 %, by weight, of: a. Any single CWC Schedule 3 chemical controlled by 1C350; or b. Any single non-CWC precursor chemical controlled by 1C350; b. Mixtures containing the following concentrations of toxic or precursor chemicals controlled by 1C450: 1. Mixtures containing the following concentrations of CWC Schedule 2 chemicals controlled by 1C450: a. Mixtures containing 1 % or less, by weight, of any single CWC Schedule 2 chemical controlled by 1C450.a.1 and a.2 (i.e., mixtures containing Amiton or PFIB); or b.… ANNEX III

Data signalling rate — the rate, as defined in ITU Recommendation 53-36, taking into account that, for non-binary modulation, baud and bit per second are not equal. Bits for coding, checking and synchronization functions are to be included. 11) ANNEX III

Dynamic adaptive routing — Automatic rerouting of traffic based on sensing and analysis of current actual network conditions. 12) ANNEX III

Media access unit — equipment that contains one or more communication interfaces (“network access controller”, “communications channel controller”, modem or computer bus) to connect terminal equipment to a network. 13) “Spectral efficiency” is the “digital transfer rate” [bits/s] / 6 dB spectrum bandwidth in Hz. 14) “Stored program controlled” is a control using instructions stored in an electronic storage that a processor can execute in order to direct the performance of predetermined functions. Note: Equipment may be “stored program controlled” whether the electronic storage is internal or external to the equipment. X.B.III.101 | Telecommunications test equipment, other than those specified in the CML or in Regulation (EU) 2021/821. X.C.III.101 | Preforms of glass or of any other material optimised for the manufacture of optical fibres controlled by X.A.III.101. X.D.III.101 | “Software” specially designed or modified for the “development”, “production” or “use” of equipment controlled by X.A.III.101 and X.B.III.101, and dynamic adaptive routing “software” as described as follows: a. “Software”, other than in machine-executable form, specially designed for “dynamic adaptive routing”; b. Not used.… ANNEX III

terminal interface equipment — equipment at which information enters or leaves the telecommunication system, e.g. telephone, data device, computer, etc. j. Equipment specially designed to provide external interconnection of “digital computers” or associated equipment that allows communications at data rates exceeding 80 Mbyte/s. Note: X.A.II.001.j does not control internal interconnection equipment (e.g., backplanes, buses) passive interconnection equipment, “network access controllers” or “communication channel controllers”. Technical Note: For the purpose of X.A.II.001.j, “communication channel controllers” is the physical interface which controls the flow of synchronous or asynchronous digital information. It is an assembly that can be integrated into computer or telecommunications equipment to provide communications access. k. Hybrid computers and “electronic assemblies” and specially designed components therefor containing analogue-to-digital converters having all of the following characteristics: 1. 32 channels or more; and 2. A resolution of 14 bit (plus sign bit) or more with a conversion rate of 200 000 Hz or more. X.D.II.001 | “Program” proof and validation “software”, “software” allowing the… ANNEX III