lexiara

2.

MEASUREMENT PRINCIPLE 2.1. The opacity of the exhaust gases produced by the engine shall be measured with the engine running under full load and at steady speed. Six measurements shall be made at engine speeds spaced out uniformly between that corresponding to maximum power and the higher of the following two engine speeds: - 45 per cent of the engine speed corresponding to maximum power ; and 1 000 rpm. The extreme points of measurement shall be situated at the limits of the interval defined above. 2.2. In the case of diesel engines which are fitted with an air supercharger which can be engaged at will, and in which engines the entry into operation of the air supercharger automatically brings about an increase in the quantity of fuel injected, the measurements shall be made both with and without the supercharger working. For each engine speed, the result of the measurement shall be the higher of the two figures obtained.

· All articles ·

Source: EUR-Lex (Cellar) · retrieved 2026-11-22 · Text as adopted (Official Journal); later amendments are not incorporated in this text.