8.

Exposure controls/personal protection For the purposes of this document exposure control means the full range of precautionary measures to be taken during use in order to minimize worker exposure. Engineering measures should be taken before personal protection equipment is necessary. Therefore give information on the system design, e. g. enclosure. This information should complement that already given in point 7.1. Indicate, with their reference, any specific control parameters such as limit values or biological standards. Give information on the recommended monitoring procedures and indicate the reference. Where personal protection is needed, specify the type of equipment to provide adequate and suitable protection: respiratory protection: in the case of dangerous gases, vapours or dust, consider the need for appropriate protective equipment, such as self-contained breathing apparatus, adequate masks and filters. hand protection: specify the type of gloves to be worn when handling the substance or preparation. If necessary indicate any additional skin and hand protection measures. eye protection: specify the type of eye protection equipment required such as: safety glasses, safety goggles, face shield. skin protection: if it is necessary to protect a part of the body other than the hands, specify the type and quality of protection equipment required, such as: apron, boots and full protective suit. If necessary, indicate specific hygiene measures.

← 7. · All articles · - →

Source: EUR-Lex (Cellar) · retrieved 2026-10-30 · Text as adopted (Official Journal); later amendments are not incorporated in this text.