preamble_6308

Council Directive 96/49/EC of 23 July 1996 on the approximation of the laws of the Member States with regard to the transport of dangerous goods by rail · European Union

6.8.5.3.1. For sheets less than 10 mm but not less than 5 mm thick, test-pieces having a cross-section of 10 mm × e mm, where "e" represents the thickness of the sheet, shall be used. Machining to 7,5 mm or 5 mm is permitted if it is necessary. The minimum value of 34 J/cm2 shall be required in every case.

← preamble_6307 · All articles · preamble_6309 →

Source: EUR-Lex (Cellar) · retrieved 2026-10-31 · Text as adopted (Official Journal); later amendments are not incorporated in this text.