anx_II__para__26
3.5.1. For each pollutant measured on the ESC and ETC tests and at each test point during the service accumulation schedule, a “best fit” regression analysis shall be made on the basis of all test results. The results of each test for each pollutant shall be expressed to the same number of decimal places as the limit value for that pollutant, as shown in the Tables in section 6.2.1 of Annex I to Directive 2005/55/EC, plus one additional decimal place. In accordance with section 3.2, if it has been agreed that only one test cycle (ESC or ETC) be run at each test point and the other test cycle (ESC or ETC) run only at the beginning and end of the service accumulation schedule, the regression analysis shall be made only on the basis of the test results from the test cycle run at each test point.
← 3.5. Determination of deterioration factors · All articles · anx_II__para__27 →
Source: EUR-Lex (Cellar) · retrieved 2026-11-10 · Text as adopted (Official Journal); later amendments are not incorporated in this text.