lexiara

anx_IV__para__99

Commission Directive 2005/78/EC of 14 November 2005 implementing Directive 2005/55/EC of the European Parliament and of the Council on the approximation of the laws of the Member States relating to the measures to be taken against the emission of gaseous and particulate pollutants from compression-ignition engines for use in vehicles, and the emission of gaseous pollutants from positive ignition engines fuelled with natural gas or liquefied petroleum gas for use in vehicles and amending Annexes I, II, III, IV and VI thereto (Text with EEA relevance) · European Union

6.4. For all emission control systems for which specific on-board evaluation tests are conducted, separate status codes, or readiness codes, must be stored in computer memory to identify correctly functioning emission control systems and those emission control systems which require further vehicle operation to complete a proper diagnostic evaluation. A readiness code need not be stored for those monitors that can be considered continuously operating monitors. Readiness codes should never be set to ‘not ready’ status upon ‘key-on’ or ‘key-off’. The intentional setting of readiness codes to ‘not ready’ status via service procedures must apply to all such codes, rather than applying to individual codes.

· All articles ·

Source: EUR-Lex (Cellar) · retrieved 2026-11-10 · Text as adopted (Official Journal); later amendments are not incorporated in this text.