lexiara

(b)

for NG fueled gas engines Text of image D = FS cCO2 + (cNMHC + cCO) × 10–4 where: Concentrations measured on dry basis shall be converted to a wet basis in accordance with section 5.2 of Appendix 1 to this Annex. The stoichiometric factor shall be calculated as follows: Text of image FS = 100 × 1 1 + α 2 + 3,76 × (1 + α 4 - ε 2) where: α, ε are the molar ratios referring to a fuel CH α O ε Alternatively, if the fuel composition is not known, the following stoichiometric factors may be used: c CO2 | = | concentration of CO2 in the diluted exhaust gas, % vol c HC | = | concentration of HC in the diluted exhaust gas, ppm C1 c NMHC | = | concentration of NMHC in the diluted exhaust gas, ppm C1 c CO | = | concentration of CO in the diluted exhaust gas, ppm F S | = | stoichiometric factor F S (diesel) | = | 13,4 F S (LPG) | = | 11,6 F S (NG) | = | 9,5

· All articles ·

Source: EUR-Lex (Cellar) · retrieved 2026-11-10 · Text as adopted (Official Journal); later amendments are not incorporated in this text.