ANNEX VI

Stamp of EC type-approval authority Communication concerning: | Of a type of: EC type-approval (1) | complete vehicle (1) extension of EC type-approval (1) | completed vehicle (1) refusal of EC type-approval (1) | incomplete vehicle (1) withdrawal of EC type-approval (1) | vehicle with complete and incomplete variants (1) vehicle with completed and incomplete variants (1) with regard to Directive 2007/46/EC EC type-approval number: Reason for extension: 0.1. Make (trade name of manufacturer): Type: 0.2.1. Commercial name(s) (2): Means of identification of type, if marked on the vehicle: 0.3.1. Location of that marking: 0.4. Category of vehicle (3): 0.5. Name and address of manufacturer of the complete vehicle (1): Name and address of manufacturer of the base vehicle (1) (4): Name and address of manufacturer of the latest built stage of the incomplete vehicle (1) (4): Name and address of manufacturer of the completed vehicle (1) (4): 0.8. Name(s) and address(es) of assembly plant(s): 0.9. Name and address of the manufacturer’s representative (if any): The undersigned hereby certifies the accuracy of the manufacturer’s description in the attached information document of the vehicle(s) described above ((a) sample(s) having been selected by the EC type-approval authority and submitted by the manufacturer as prototype(s) of the vehicle type) and that the attached test results are applicable to the vehicle type. 1. For complete and completed vehicles/variants (1): The vehicle type meets/does not meet (1) the technical requirements of all the relevant regulatory acts as prescribed in Annex IV and Annex XI (1) (4) to Directive 2007/46/EC. 2. For incomplete vehicles/variants (1): The vehicle type meets/does not meet (1) the technical requirements of the regulatory acts listed in the table on side 2. 3. The approval is granted/refused/withdrawn (1). 4. The approval is granted in accordance with Article 20 and the validity of the approval is thus limited to dd/mm/yy. (Place) | (Signature) | (Date) Attachments: | Information package. Test results (see Annex VIII). Name(s) and specimen(s) of the signature(s) of the person(s) authorised to sign certificates of conformity and a statement of their position in the company. NB: If this model is used for type-approval pursuant to Articles 20, 22 or 23, it may not bear the heading ‘EC Vehicle Type-Approval Certificate’, except: in the case mentioned in Article 20 where the Commission has decided to allow a Member State to grant a type-approval in accordance with this Directive, in the case of vehicles of the category M1, type-approved according to the procedure prescribed in Article 22. Side 2 This EC type-approval is, where incomplete and completed vehicles or variants are concerned, based on the approval(s) for incomplete vehicles listed below: Stage 1: Manufacturer of the base vehicle: EC type-approval number: Dated: Applicable to variants: Stage 2: Manufacturer: EC type-approval number: Dated: Applicable to variants: Stage 3: Manufacturer: EC type-approval number: Dated: Applicable to variants: In the case where the approval includes one or more incomplete variants, list those variants which are complete or completed. Complete/completed variant(s): List of requirements applicable to the approved incomplete vehicle type or variant (as appropriate, taking account of the scope and latest amendment to each of the regulatory acts listed below). Item | Subject | Regulatory act reference | Last amended | Applicable to variants | | | | (List only subjects for which a EC type-approval exists.) In the case of special purpose vehicles, exemptions granted or special provisions applied pursuant to Annex XI and exemptions granted pursuant to Article 20: Regulatory act reference | Item number | Kind of approval and nature of exemption | Applicable to variants | | | Subject | Regulatory act reference (5) | As amended by | Applicable to variants 1. | Sound levels | 70/157/EEC | | 2. | Emissions | 70/220/EEC | | 3. | Fuel tanks/Rear protective devices | 70/221/EEC | | 4. | Rear registration plate space | 70/222/EEC | | 5. | Steering effort | 70/311/EEC | | 6. | Door latches and hinges | 70/387/EEC | | 7. | Audible warning | 70/388/EEC | | 8. | Rear visibility | 71/127/EEC | | 8A. | Indirect vision devices | 2003/97/EC | | 9. | Braking | 71/320/EEC | | 10. | Suppression (radio) | 72/245/EEC | | 11. | Diesel smoke | 72/306/EEC | | 12. | Interior fittings | 74/60/EEC | | 13. | Anti-theft and immobiliser | 74/61/EEC | | 14. | Protective steering | 74/297/EEC | | 15. | Seat strength | 74/408/EEC | | 16. | Exterior projections | 74/483/EEC | | 17. | Speedometer and reverse gear | 75/443/EEC | | 18. | Plates (statutory) | 76/114/EEC | | 19. | Seat belt anchorages | 76/115/EEC | | 20. | Installation of lighting and light signalling devices | 76/756/EEC | | 21. | Retro reflectors | 76/757/EEC | | 22. | End-outline, front-position (side), rear-position (side), stop, side marker, daytime running lamps | 76/758/EEC | | 23. | Direction indicators | 76/759/EEC | | 24. | Rear registration plate lamps | 76/760/EEC | | 25. | Headlamps (including bulbs) | 76/761/EEC | | 26. | Front fog lamps | 76/762/EEC | | 27. | Towing hooks | 77/389/EEC | | 28. | Rear fog lamps | 77/538/EEC | | 29. | Reversing lamps | 77/539/EEC | | 30. | Parking lamps | 77/540/EEC | | 31. | Seat belts and restraint systems | 77/541/EEC | | 32. | Forward vision | 77/649/EEC | | 33. | Identification of controls | 78/316/EEC | | 34. | Defrost/Demist | 78/317/EEC | | 35. | Wash/Wipe | 78/318/EEC | | 36. | Heating systems | 2001/56/EC | | 37. | Wheel guards | 78/549/EEC | | 38. | Head restraints | 78/932/EEC | | 39. | CO2 emissions/Fuel consumption | 80/1268/EEC | | 40. | Engine power | 80/1269/EEC | | 41. | Diesel emissions | 88/77/EEC | | 42. | Lateral protection | 89/297/EEC | | 43. | Spray-suppression systems | 91/226/EEC | | 44. | Masses and dimensions (cars) | 92/21/EEC | | 45. | Safety glass | 92/22/EEC | | 46. | Tyres | 92/23/EEC | | 47. | Speed limiters | 92/24/EEC | | 48. | Masses and dimensions (other than vehicles referred to in item 44) | 97/27/EC | | 49. | External projections of cabs | 92/114/EEC | | 50. | Couplings | 94/20/EC | | 51. | Flammability | 95/28/EC | | 52. | Buses and coaches | 2001/85/EC | | 53. | Frontal impact | 96/79/EC | | 54. | Side impact | 96/27/EC | | 55. | Vehicles intended for the transport of dangerous goods | 98/91/EC | | 56. | Front underrun protection | 2000/40/EC | | 57. | Pedestrian protection | 2003/102/EC | | Stamp of EC type-approval authority Communication concerning: | EC type-approval (1) | a type of system/type of a vehicle with regard to a system (1) extension of EC type-approval (1) refusal of EC type-approval (1) withdrawal of EC type-approval (1) with regard to Directive …/…/EC/Regulation (EC) No …/… (1), as last amended by Directive …/…/EC/Regulation (EC) No …/… (1) EC type-approval number: Reason for extension: 0.1. Make (trade name of manufacturer): Type: 0.2.1. Commercial name(s) (if available): Means of identification of type, if marked on the vehicle (6): 0.3.1. Location of that marking: 0.4. Category of vehicle (7): 0.5. Name and address of manufacturer: 0.8. Name(s) and address(es) of assembly plant(s): 0.9. Representative of the manufacturer: 1. Additional information (where applicable): see Addendum 2. Technical service responsible for carrying out the tests: 3. Date of test report: 4. Number of test report: 5. Remarks (if any): see Addendum 6. Place: 7. Date: 8. Signature: Attachments: | Information package. Test report. Additional information […]: 1.1.1. […]: […] Type-approval number of each component or separate technical unit installed on the vehicle type to comply with this Directive or Regulation 2.1. […]: Remarks 3.1. […]: Stamp of EC type-approval authority Communication concerning: | EC type-approval (1) | of a type of component/separate technical unit (1) extension of EC type-approval (1) refusal of EC type-approval (1) withdrawal of EC type-approval (1) with regard to Directive …/…/EC/Regulation (EC) No …/… (1), as last amended by Directive …/…/EC/Regulation (EC) No …/… (1) EC type-approval number: Reason for extension: 0.1. Make (trade name of manufacturer): 0.2. Type: Means of identification of type, if marked on the component/separate technical unit (1) (6): 0.3.1. Location of that marking: 0.5. Name and address of manufacturer: 0.7. In the case of components and separate technical units, location and method of affixing of the EC approval mark: 0.8. Name(s) and address(es) of assembly plant(s): 0.9. Name and address of the manufacturer’s representative (if any): 1. Additional information (where applicable): see Addendum 2. Technical service responsible for carrying out the tests: 3. Date of test report: 4. Number of test report: 5. Remarks (if any): see Addendum 6. Place: 7. Date: 8. Signature: Attachments: | Information package. Test report. Additional information […]: 1.1.1. […]: […] Restriction of use of the device (if any) 2.1. […]: Remarks 3.1. […]:

← (c) · All articles · MODEL A →

Source: EUR-Lex (Cellar) · retrieved 2026-10-28 · Text as adopted (Official Journal); later amendments are not incorporated in this text.