Statistical procedure for in-service conformity testing
1. This procedure shall be used to verify the in-service conformity requirements for the type 1 test. The applicable statistical method shall be the one set out in Appendix 4 to UN/ECE Regulation No 83, with the exceptions set out in sections 2, 3 and 4. 2. Footnote 1 shall not apply. 3. In paragraphs 3.2.3.2.1 and 3.2.4.2 of Appendix 4 to UN/ECE Regulation No 83, the reference to paragraph 6 of Appendix 3 shall be understood as reference to Section 6 of Appendix 1 to Annex XV to this Regulation. 4. In Figure 4/1. of Appendix 4 to UN/ECE Regulation No 83, the following shall apply: the references to paragraph 8.2.1 shall be understood as reference to Section 1.1 of Annex XV to this Regulation; the reference to Appendix 3 shall be understood as reference to Appendix 1 of Annex XV to this Regulation; footnote 1 shall be understood as follows: In this case, TAA means the approval authority that granted the type-approval according to Directive 70/220/EC.
← Appendix 2 · All articles · doc__heading__35__para →
Source: EUR-Lex (Cellar) · retrieved 2026-11-20 · Text as adopted (Official Journal); later amendments are not incorporated in this text.