lexiara

3.3. DenominatorM

3.3.1. The purpose of the denominator is to provide a counter indicating the number of vehicle driving events, taking into account special conditions for a specific monitor. The denominator shall be incremented at least once per driving cycle, if during this driving cycle such conditions are met and the general denominator is incremented as specified in section 3.5 unless the denominator is disabled according to section 3.7 of this Appendix.. 3.3.2. In addition to the requirements of section 3.3.1: Secondary air system monitor denominator(s) shall be incremented if the commanded ‘on’ operation of the secondary air system occurs for a time greater than or equal to 10 seconds. For purposes of determining this commanded ‘on’ time, the OBD system may not include time during intrusive operation of the secondary air system solely for the purposes of monitoring; Denominators of monitors of systems only active during cold start shall be incremented if the component or strategy is commanded ‘on’ for a time greater than or equal to 10 seconds; The denominator(s) for monitors of Variable Valve Timing (VVT) and/or control systems shall be incremented if the component is commanded to function (e.g., commanded ‘on’, ‘open’, ‘closed’, ‘locked’, etc.) on two or more occasions during the driving cycle or for a time greater than or equal to 10 seconds, whichever occurs first; For the following monitors, the denominator(s) shall be incremented by one if, in addition to meeting the requirements of this section on at least one driving cycle, at least 800 cumulative kilometres of vehicle operation have been experienced since the last time the denominator was incremented: Diesel oxidation catalyst Diesel particulate filter 3.3.3. For hybrid vehicles, vehicles that employ alternative engine start hardware or strategies (e.g. integrated starter and generators), or alternative fuel vehicles (e.g. dedicated, bi-fuel, or dual-fuel applications), the manufacturer may request the approval of the approval authority to use alternative criteria to those set forth in this section for incrementing the denominator. In general, the approval authority shall not approve alternative criteria for vehicles that only employ engine shut off at or near idle/vehicle stop conditions. Approval by the approval authority of the alternative criteria shall be based on the equivalence of the alternative criteria to determine the amount of vehicle operation relative to the measure of conventional vehicle operation in accordance with the criteria in this section.

· All articles ·

Source: EUR-Lex (Cellar) · retrieved 2026-11-20 · Text as adopted (Official Journal); later amendments are not incorporated in this text.