3. Ageing Bench Equipment and Procedures
3.1. The standard ageing bench consists of an engine, engine controller, and engine dynamometer. Other configurations may be acceptable (e.g. whole vehicle on a dynamometer, or a burner that provides the correct exhaust conditions), as long as the aftertreatment system inlet conditions and control features specified in this Appendix are met. A single ageing bench may have the exhaust flow split into several streams providing that each exhaust stream meets the requirements of this appendix. If the bench has more than one exhaust stream, multiple aftertreatment systems may be aged simultaneously. 3.2. Exhaust System Installation. The entire aftertreatment system, together with all exhaust piping which connects these components, will be installed on the bench. For engines with multiple exhaust streams (such as some V6 and V8 engines), each bank of the exhaust system will be installed separately on the bench. The entire aftertreatment system will be installed as a unit for ageing. Alternatively, each individual component may be separately aged for the appropriate period of time.
← sec_1__14__para__4 · All articles · sec_3__12__para →
Source: EUR-Lex (Cellar) · retrieved 2026-11-20 · Text as adopted (Official Journal); later amendments are not incorporated in this text.