4. IN-SERVICE TESTING
4.1. When a check on vehicles is deemed necessary, emission tests in accordance with Annex III to Directive 70/220/EEC shall be performed on pre-conditioned vehicles selected in accordance with the requirements of sections 2 and 3 of this Appendix. 4.2. Vehicles equipped with an OBD system may be checked for proper in-service functionality of the malfunction indication, etc., in relation to levels of emissions (e. g. the malfunction indication limits defined in Annex XI to Directive 70/220/EEC) for the type-approved specifications. 4.3. The OBD system may be checked, for example, for levels of emissions above the applicable limit values with no malfunction indication, systematic erroneous activation of the malfunction indication and identified faulty or deteriorated components in the OBD system. 4.4. If a component or system operates in a manner not covered by the particulars in the type-approval certificate and/or information package for such vehicle types and such deviation has not been authorized under Article 5(3) or (4) of Directive 70/156/EEC, with no malfunction indication by the OBD, the component or system shall not be replaced prior to emission testing, unless it is determined that the component or system has been tampered with or abused in such a manner that the OBD does not detect the resulting malfunction.
← sec_3__18__para__8 · All articles · sec_4__10__para →
Source: EUR-Lex (Cellar) · retrieved 2026-11-20 · Text as adopted (Official Journal); later amendments are not incorporated in this text.