1.1. Directive 97/68/EC of the European Parliament and of the Council of 16 December 1997 on the approximation of the laws of the Member States relating to measures against the emission of gaseous and particulate pollutants from internal combustion engines to be installed in non-road mobile machinery OJ L 59, 27.2.1998, p. 1.

Regulation (EC) No 596/2009 of the European Parliament and of the Council of 18 June 2009 adapting a number of instruments subject to the procedure referred to in Article 251 of the Treaty to Council Decision 1999/468/EC with regard to the regulatory procedure with scrutiny — Adaptation to the regulatory procedure with scrutiny — Part Four · European Union

As regards Directive 97/68/EC, the Commission should be empowered in particular to establish the conditions under which amendments which are necessary in the light of adaptation to technical progress should be adopted. Since those measures are of general scope and are designed to amend non-essential elements of Directive 97/68/EC, inter alia, by supplementing it with new non-essential elements, they must be adopted in accordance with the regulatory procedure with scrutiny provided for in Article 5a of Decision 1999/468/EC. Accordingly, Directive 97/68/EC is hereby amended as follows: in Article 4(2), the last sentence shall be replaced by the following: ‘The Commission shall amend Annex VIII. Those measures, designed to amend non-essential elements of this Directive, shall be adopted in accordance with the regulatory procedure with scrutiny referred to in Article 15(2).’; Article 7a(4) shall be replaced by the following: ‘4. The Commission shall adapt Annex VII to integrate the additional and specific information which may be required as regards the type-approval certificate for engines to be installed in inland waterway vessels. Those measures, designed to amend non-essential elements of this Directive, shall be adopted in accordance with the regulatory procedure with scrutiny referred to in Article 15(2).’; Article 14 shall be replaced by the following: ‘Article 14 The Commission shall adopt any amendments which are necessary in order to adapt the Annexes, with the exception of the requirements specified in section 1, sections 2.1 to 2.8 and section 4 of Annex I, to technical progress. Those measures, designed to amend non-essential elements of this Directive, shall be adopted in accordance with the regulatory procedure with scrutiny referred to in Article 15(2).’; Article 14a shall be replaced by the following: ‘Article 14a The Commission shall study possible technical difficulties in complying with the stage II requirements for certain uses of the engines, in particular mobile machinery in which engines of classes SH:2 and SH:3 are installed. If the Commission studies conclude that for technical reasons certain mobile machinery, in particular, multi-positional, hand-held engines intended for professional use, cannot meet those requirements by the deadlines laid down, it shall submit, by 31 December 2003, a report accompanied by appropriate proposals for extensions of the period referred to in Article 9a(7) and/or further derogations, not exceeding five years in duration, save in exceptional circumstances, for such machinery. Those measures, designed to amend non-essential elements of this Directive by supplementing it, shall be adopted in accordance with the regulatory procedure with scrutiny referred to in Article 15(2).’; Article 15 shall be amended as follows: paragraph 2 shall be replaced by the following: ‘2. Where reference is made to this paragraph, Article 5a(1) to (4) and Article 7 of Decision 1999/468/EC shall apply, having regard to the provisions of Article 8 thereof.’; paragraph 3 shall be deleted; in Annex I, point 4.1.2.7, the last sentence shall be replaced by the following: ‘The Commission shall define the control area to which the percentage not to be exceeded is to apply and the excluded engine operating conditions. Those measures, designed to amend non-essential elements of this Directive, shall be adopted in accordance with the regulatory procedure with scrutiny referred to in Article 15(2).’; in Annex III, the last paragraph of point 1.3.2 shall be replaced by the following: ‘Prior to the introduction of the cold/hot composite test sequence, the Commission shall modify the symbols (Annex I, section 2.18), the test sequence (Annex III) and the calculation equations (Annex III, Appendix 3). Those measures, designed to amend non-essential elements of this Directive, shall be adopted in accordance with the regulatory procedure with scrutiny referred to in Article 15(2).’.

← 1. ENTERPRISE · All articles · anx_ANNEX__cpt_1__cpt_1__text_1 →

Source: EUR-Lex (Cellar) · retrieved 2026-10-21 · Text as adopted (Official Journal); later amendments are not incorporated in this text.