lexiara

anx_ANNEX__cpt_5__cpt_10__point_18__point_d__text_2

‘1. Dicalcium phosphate must be produced by a process that: (a) ensures that all Category 3 bone-material is finely crushed and degreased with hot water and treated with dilute hydrochloric acid (at a minimum concentration of 4 % and a pH of less than 1,5) over a period of at least two days; (b) following the procedure provided for in point (a), applies a treatment of the obtained phosphoric liquor with lime, resulting in a precipitate of dicalcium phosphate at pH 4 to 7; and (c) finally, air-dries the precipitate of dicalcium phosphate with inlet temperature of 65 °C to 325 °C and end temperature between 30 °C and 65 °C, or by an equivalent process approved by the Commission. Those measures, designed to amend non-essential elements of this Regulation by supplementing it, shall be adopted in accordance with the regulatory procedure with scrutiny referred to in Article 33(3).’;

· All articles ·

Source: EUR-Lex (Cellar) · retrieved 2026-10-21 · Text as adopted (Official Journal); later amendments are not incorporated in this text.