anx_II__cpt_1__cpt_1__cpt_1

Commission Regulation (EU) No 1003/2010 of 8 November 2010 concerning type-approval requirements for the space for mounting and the fixing of rear registration plates on motor vehicles and their trailers and implementing Regulation (EC) No 661/2009 of the European Parliament and of the Council concerning type-approval requirements for the general safety of motor vehicles, their trailers and systems, components and separate technical units intended therefor Text with EEA relevance · European Union

1.1. Shape and dimensions of the space for mounting a rear registration plate. The space for mounting shall comprise of a flat or virtually flat rectangular surface with the following minimum dimensions: either width: 520 mm height: 120 mm or width: 340 mm height: 240 mm The surface to be covered by the registration plate may have holes or gaps. In case of vehicles of category M_(1) the width of the hole or gap shall not exceed 40 mm without having to take into account its length. The surface to be covered by the registration plate may have protrusions, provided that these do not project more than 5,0 mm in relation to the nominal surface. Patches of very soft materials, such as foam or felt for the purpose of the elimination of vibration of the registration plate, shall not be taken into account.

← 1. REQUIREMENTS · All articles · anx_II__cpt_1__cpt_1__cpt_1__text_1 →

Source: EUR-Lex (Cellar) · retrieved 2026-11-05 · Text as adopted (Official Journal); later amendments are not incorporated in this text.