1.2.1.5.

Commission Regulation (EU) No 1003/2010 of 8 November 2010 concerning type-approval requirements for the space for mounting and the fixing of rear registration plates on motor vehicles and their trailers and implementing Regulation (EC) No 661/2009 of the European Parliament and of the Council concerning type-approval requirements for the general safety of motor vehicles, their trailers and systems, components and separate technical units intended therefor Text with EEA relevance · European Union

Geometrical visibility: If the height of the upper edge of the plate from the ground surface does not exceed 1,20 m, the plate shall be visible in the whole space included within the following four planes: the two vertical planes touching the two lateral edges of the plate and forming an angle measured outwards of 30° in relation to the longitudinal median plane of the vehicle, the plane touching the upper edge of the plate and forming an angle measured upwards of 15° with the horizontal, the horizontal plane through the lower edge of the plate. If the height of the upper edge of the plate from the ground surface exceeds 1,20 m, the plate shall be visible in the whole space included within the following four planes: the two vertical planes touching the two lateral edges of the plate and forming an angle measured outwards of 30° in relation to the longitudinal median plane of the vehicle, the plane touching the upper edge of the plate and forming an angle measured upwards of 15° with the horizontal, the plane touching the lower edge of the plate and forming an angle measured downwards of 15° with the horizontal.

← anx_II__cpt_1__cpt_1__cpt_2__item_1__item_4__item_2__text_1 · All articles · anx_II__cpt_1__cpt_1__cpt_2__item_1__item_5__text_1 →

Source: EUR-Lex (Cellar) · retrieved 2026-11-05 · Text as adopted (Official Journal); later amendments are not incorporated in this text.