MODEL

Information document No … relating to the EC type-approval of a motor vehicle or a trailer with regard to the space for mounting and the fixing of rear registration plates. The following information shall be supplied in triplicate and include a list of contents. Any drawings shall be supplied in appropriate scale and in sufficient detail on size A4 or on a folder of A4 format. Photographs, if any, shall show sufficient detail. If the systems, components or separate technical units referred to in this information document have electronic controls, information concerning their performance shall be supplied. 0.1. Make (trade name of manufacturer): … 0.2. Type: … 0.2.1. Commercial name(s) (if available): … 0.3. Means of identification of type, if marked on the vehicle If the means of identification of type contains characters not relevant to describe the vehicle, component or separate technical unit types covered by this information document, such characters shall be represented in the documentation by the symbol ‘?’ (e.g. ABC??123??). : … 0.3.1. Location of that marking: … 0.4. Category of vehicle Classified according to the definitions set out in Directive 2007/46/EC Part A of Annex II. : … 0.5. Name and address of manufacturer: … 0.8. Name(s) and address(es) of assembly plant(s): … 0.9. Name and address of the manufacturer's representative (if any): … 1.1. Photographs and/or drawings of a representative vehicle: … 2.4. Range of vehicle dimensions (overall) 2.4.2. For chassis with bodywork 2.4.2.3. Height (in running order) Term No 6.3. (for suspensions adjustable for height, indicate normal running position): … 2.6. Mass in running order Mass of the vehicle with bodywork and, in the case of a towing vehicle of category other than M_(1), with coupling device, if fitted by the manufacturer, in running order, or mass of the chassis or chassis with cab, without bodywork and/or coupling device if the manufacturer does not fit the bodywork and/or coupling device (including liquids, tools, spare wheel, if fitted, and driver and, for buses and coaches, a crew member if there is a crew seat in the vehicle) The mass of the driver and, if applicable, of the crew member is assessed at 75 kg (subdivided into 68 kg occupant mass and 7 kg luggage mass according to ISO Standard 2416 - 1992), the fuel tank is filled to 90 % and the other liquid containing systems (except those for used water) to 100 % of the capacity specified by the manufacturer. (maximum and minimum for each variant): … 9.14. Space for mounting rear registration plates (give range where appropriate, drawings may be used where applicable): … 9.14.1. Height above road surface, upper edge: … 9.14.2. Height above road surface, lower edge: … 9.14.3. Distance of the centre line from the longitudinal median plane of the vehicle: … 9.14.4. Distance from the left vehicle edge: … 9.14.5. Dimensions (length × width): … 9.14.6. Inclination of the plane to the vertical: … 9.14.7. Angle of visibility in the horizontal plane: …

← PART 1 · All articles · anx_I__cpt_1__cpt_1__cpt_1__text_1 →

Source: EUR-Lex (Cellar) · retrieved 2026-11-05 · Text as adopted (Official Journal); later amendments are not incorporated in this text.