anx_II__cpt_1__cpt_5__item_3__text_1

Commission Regulation (EU) No 458/2011 of 12 May 2011 concerning type-approval requirements for motor vehicles and their trailers with regard to the installation of their tyres and implementing Regulation (EC) No 661/2009 of the European Parliament and of the Council concerning type-approval requirements for the general safety of motor vehicles, their trailers and systems, components and separate technical units intended therefor Text with EEA relevance · European Union

In the case of some special vehicles, as listed below, fitted with tyres of class C2 or C3, the ‘table load-capacity variation with speed’ as described in paragraph 3.2.2 of this Annex shall not be applied. In such a case, the tyre maximum load rating to check against the technically permissible maximum axle mass (see paragraphs 3.1.2 to 3.1.4) shall be determined by multiplying the load corresponding to the load capacity index by an appropriate coefficient which is related to the type of vehicle and its use, rather than to the maximum vehicle design speed, and the requirements of paragraphs 4.1.1 and 4.1.2 of this Annex shall not apply.

← 5.3. · All articles · anx_II__cpt_1__cpt_5__item_3__text_2 →

Source: EUR-Lex (Cellar) · retrieved 2026-11-06 · Text as adopted (Official Journal); later amendments are not incorporated in this text.