Administrative provisions for the type-approval of vehicles with regard to vehicle access and manoeuvrability
Information document No … relating to the EC type-approval of a vehicle with regard to vehicle access and manoeuvrability. The following information, if applicable, shall be supplied in triplicate and include a list of contents. Any drawings shall be supplied in appropriate scale and in sufficient detail on size A4 or on a folder of A4 format. Photographs, if any, shall show sufficient detail. If the systems, components or separate technical units referred to in this information document have electronic controls, information concerning their performance shall be supplied. 0.1. Make (trade name of manufacturer): … 0.2. Type: … 0.2.1. Commercial name(s) (if available): … 0.3. Means of identification of type, if marked on the vehicle If the means of identification of type contains characters not relevant to describe the vehicle, component or separate technical unit types covered by this information document, such characters shall be represented in the documentation by the symbol ‘?’ (e.g. ABC??123??). … 0.3.1. Location of that marking: … 0.4. Category of vehicle Classified according to the definitions set out in Part A of Annex II to Directive 2007/46/EC. : … 0.5. Name and address of manufacturer: … 0.8. Name(s) and address(es) of assembly plant(s): … 0.9. Name and address of the manufacturer’s representative (if any) … 1.1. Photographs and/or drawings of a representative vehicle: … Mass of the vehicle with bodywork and, in the case of a towing vehicle of category other than M_(1), with coupling device, if fitted by the manufacturer, in running order, or mass of the chassis or chassis with cab, without bodywork and/or coupling device if the manufacturer does not fit the bodywork and/or coupling device (including liquids, tools, spare wheel, if fitted, and driver and, for buses and coaches, a crew member if there is a crew seat in the vehicle) The mass of the driver and, if applicable, of the crew member is assessed at 75 kg (subdivided into 68 kg occupant mass and 7 kg luggage mass according to ISO Standard 2416 - 1992), the fuel tank is filled to 90 % and the other liquid containing systems (except those for used water) to 100 % of the capacity specified by the manufacturer. (maximum and minimum for each variant): … Reverse: … 9.3. Occupant doors, latches and hinges 9.3.1. Door configuration and number of doors: … 9.3.4. Details, including dimensions, of entrances, steps and necessary handles where applicable: … Stamp of type-approval authority Communication concerning: Delete where not applicable. EC type-approval extension of EC type-approval refusal of EC type-approval withdrawal of EC type-approval of a type of vehicle with regard to vehicle access and manoeuvrability with regard to Regulation (EU) No 130/2012, as last amended by Regulation (EU) No …/… EC type-approval number: … Reason for extension: … 0.1. Make (trade name of manufacturer): … 0.2. Type: … 0.2.1. Commercial name(s) (if available): … 0.3. Means of identification of type, if marked on the vehicle If the means of identification of type contains characters not relevant to describe the vehicle, component or separate technical unit types covered by this information document, such characters shall be represented in the documentation by the symbol “?” (e.g. ABC??123??). : … 0.3.1. Location of that marking: … 0.4. Category of vehicle As defined in Directive 2007/46/EC, Annex II, Section A. : … 0.5. Name and address of manufacturer: … 0.8. Name(s) and address(es) of assembly plant(s): … 0.9. Name and address of the manufacturer's representative (if any): … 1. Additional information: see Addendum. 2. Technical service responsible for carrying out the tests: … 3. Date of test report: … 4. Number of test report: … 5. Remarks (if any): see Addendum. 6. Place: … 7. Date: … 8. Signature: … Attachments: Information package Test report
← ANNEX I · All articles · PART 1 →
Source: EUR-Lex (Cellar) · retrieved 2026-11-20 · Text as adopted (Official Journal); later amendments are not incorporated in this text.