anx_III__cpt_1__cpt_1__table_3

A2. Materials Processing No Description Related item from Annex I to Regulation (EC) No 428/2009 III.A2.008 Liquid-liquid contacting equipment (mixer-settlers, pulsed columns, centrifugal contactors); and liquid distributors, vapour distributors or liquid collectors designed for such equipment, where all surfaces that come in direct contact with the chemical(s) being processed are made from the following materials: N.B. SEE ALSO II.A2.014 1. Stainless steel. Note: for stainless steel with more than 25 % nickel and 20 % chromium by weight see entry II.A2.014.a 2B350.e III.A2.009 Industrial equipment and components, other than those specified in 2B350.d, as follows: N.B. SEE ALSO II.A2.015 Heat exchangers or condensers with a heat transfer surface area greater than 0,05 m^(2), and less than 30 m^(2); and tubes, plates, coils or blocks (cores) designed for such heat exchangers or condensers, where all surfaces that come in direct contact with the fluid(s) are made from the following materials: 1. Stainless steel. Note 1: for stainless steel with more than 25 % nickel and 20 % chromium by weight see entry II.A2.015a Note 2: This item does not cover vehicle radiators. Technical Note: The materials used for gaskets and seals and other implementation of sealing functions do not determine the status of control of the heat exchanger. 2B350.d III.A2.010 Multiple-seal, and seal-less pumps, other than those specified in 2B350.i, suitable for corrosive fluids, with manufacturer's specified maximum flow-rate greater than 0,6 m^(3)/hour, or vacuum pumps with manufacturer's specified maximum flow-rate greater than5 m^(3)/hour [measured under standard temperature (273 K or 0 °C) and pressure (101,3 kPa) conditions]; and casings (pump bodies), preformed casing liners, impellers, rotors or jet pump nozzles designed for such pumps, in which all surfaces that come in direct contact with the chemical(s) being processed are made from the following materials: N.B. SEE ALSO II.A2.016 1. Stainless steel; Note: for stainless steel with more than 25 % nickel and 20 % chromium by weight see entry II.A2.016a Technical Note: The materials used for gaskets and seals and other implementation of sealing functions do not determine the status of control of the pump. 2B350.i III.A2.017 Electrical Discharge Machine (EDM) tools for removing or cutting metals, ceramics or "composites", as follows, and specially designed ram, sinker or wire electrodes therefor: (a) Ram or sinker electrode Electrical Discharge Machines; (b) Wire electrode Electrical Discharge Machines. Note: Electrical Discharge Machines are also known as Spark Erosion Machines or Wire Erosion Machines. 2B001.d III.A2.018 Computer controlled or "numerically controlled" co-ordinate measuring machines (CMM), or dimensional inspection machines, having a three dimensional (volumetric) maximum permissible error of indication (MPP_(E)) at any point in the operating range of the machine (i.e. within the length axes) equal to or less (better) than (3 + L/1000) μm (L is the measured length in mm), tested according to ISO 10360-2 (2001), and measurement probes designed therefor. 2B006.a 2B206.a III.A2.019 Computer controlled or "numerically controlled" Electron Beam Welding Machines, and specially designed components therefor. 2B001.e.1.b III.A2.020 Computer controlled or "numerically controlled" Laser Welding and Laser Cutting Machines, and specially designed components therefor. 2B001.e.1.c III.A2.021 Computer controlled or "numerically controlled" Plasma Cutting Machines, and specially designed components therefor. 2B001.e.1 III.A2.022 Vibration Monitoring Equipment specially designed for rotors or rotating equipment and machinery, capable of measuring any frequency in the range 600-2000 Hz. 2B116 III.A2.023 Liquid Ring Vacuum Pumps, and specially designed components therefore. 2B231 2B350.i III.A2.024 Rotary Vane Vacuum Pumps, and specially designed components therefore. Note 1: III.A2.024 does not control rotary vane vacuum pumps that are specially designed for specific other equipment. Note 2: The control status of rotary vane vacuum pumps that are specially designed for specific other equipment is determined by the control status of the other equipment 2B231 2B235.i 0B002.f III.A2.025 Air filters, as follows, having one or more physical size dimension exceeding 1000 mm: (a) High Efficiency Particulate Air (HEPA) filters; (b) Ultra-Low Penetration Air (ULPA) filters. Note: III.A2.025 does not control air filters specially designed for medical equipment. 2B352.d

← anx_III__cpt_1__cpt_1__table_2__row_10__cell_3 · All articles · anx_III__cpt_1__cpt_1__table_3__text_1 →

Source: EUR-Lex (Cellar) · retrieved 2026-11-10 · Text as adopted (Official Journal); later amendments are not incorporated in this text.