anx_II__cpt_1__cpt_1__table_5

A6. Sensors and Lasers No Description Related item from Annex I to Regulation (EC) No 428/2009 II.A6.001 Yttrium aluminium garnet (YAG) rods — II.A6.002 Optical equipment and components, other than those specified in 6A002, 6A004.b as follows: Infrared optics in the wavelength range 9000 nm – 17000 nm and components thereof, including cadmium telluride (CdTe) components. 6A002 6A004.b II.A6.003 Wave front corrector systems for use with a laser beam having a diameter exceeding 4 mm, and specially designed components thereof, including control systems, phase front sensors and 'deformable mirrors' including bimorph mirrors. Note: This item does not cover mirrors defined in 6A004.a, 6A005.e and 6A005.f. 6A003 II.A6.004 Argon ion "lasers" having an average output power equal to or greater than 5 W. Note: This item does not cover argon ion 'lasers' defined in items 0B001.g.5, 6A005 and 6A205.a. 6A005.a.6 6A205.a II.A6.005 Semiconductor "lasers" and components thereof, as follows: a. Individual semiconductor "lasers" with an output power greater than 200 mW each, in quantities larger than 100; b. Semiconductor "laser" arrays having an output power greater than 20 W. Notes: 1. Semiconductor "lasers" are commonly called "laser" diodes. 2. This item does not cover "lasers" defined in items 0B001.g.5, 0B001.h.6 and 6A005.b. 3. This item does not cover "laser" diodes with a wavelength in the range 1200 nm – 2000 nm. 6A005.b II.A6.006 Tunable semiconductor "lasers" and tunable semiconductor 'laser' arrays, of a wavelength between 9 μm and 17 μm, as well as array stacks of semiconductor 'lasers' containing at least one tunable semiconductor 'laser' array of such wavelength. Notes: 1. Semiconductor "lasers" are commonly called "laser" diodes. 2. This item does not cover semiconductor "lasers" defined in items 0B001.h.6 and 6A005.b 6A005.b II.A6.007 Solid state "tunable""lasers" and specially designed components thereof as follows: a. Titanium-sapphire lasers, b. Alexandrite lasers. Note: This item does not cover titanium-sapphire and alexandrite lasers defined in items 0B001.g.5, 0B001.h.6 and 6A005.c.1. 6A005.c.1 II.A6.008 Neodymium-doped (other than glass) "lasers", having an output wavelength greater than 1000 nm but not exceeding 1100 nm and output energy exceeding 10 J per pulse. Note: This item does not cover neodymium-doped (other than glass) 'lasers' defined in item 6A005.c.2.b. 6A005.c.2 II.A6.009 Components of acousto-optics, as follows: a. Framing tubes and solid-state imaging devices having a recurrence frequency equal to or exceeding 1 kHz; b. Recurrence frequency supplies; c. Pockels cells. 6A203.b.4.c II.A6.010 Radiation-hardened cameras, or lenses thereof, other than those specified in 6A203.c., specially designed, or rated as radiation-hardened, to withstand a total radiation dose greater than 50 × 10^(3) Gy(silicon) (5 × 10^(6) rad (silicon)) without operational degradation. Technical Note: The term Gy(silicon) refers to the energy in Joules per kilogram absorbed by an unshielded silicon sample when exposed to ionising radiation. 6A203.c II.A6.011 Tunable pulsed dye laser amplifiers and oscillators, having all of the following characteristics: 1. Operating at wavelengths between 300 nm and 800 nm; 2. An average output power greater than 10 W but not exceeding 30 W; 3. A repetition rate greater than 1 kHz; and 4. Pulse width less than 100 ns. Notes: 1. This item does not cover single mode oscillators. 2. This item does not cover tunable pulsed dye laser amplifiers and oscillators defined in item 6A205.c, 0B001.g.5 and 6A005. 6A205.c II.A6.012 Pulsed carbon dioxide "lasers" having all of the following characteristics: 1. Operating at wavelengths between 9000 nm and 11000 nm; 2. A repetition rate greater than 250 Hz; 3. An average output power greater than 100 W but not exceeding 500 W; and 4. Pulse width less than 200 ns. Note: This item does not cover pulsed carbon dioxide laser amplifiers and oscillators defined in item 6A205.d., 0B001.h.6. and 6A005.d. 6A205.d II.A6.013 Copper vapour 'lasers' having both of the following characteristics: 1. Operating at wavelengths between 500 and 600 nm; and 2. An average output power equal to or greater than 15 W. 6A005.b II.A6.014 Pulsed carbon monoxide 'lasers' having all of the following characteristics: 1. Operating at wavelengths between 5000 and 6000 nm; 2. A repetition rate greater than 250 Hz; 3. An average output power greater than 100 W; and 4. Pulse width of less than 200 ns. Note: This item does not control the higher power (typically 1 to 5 kW) industrial carbon monoxide lasers used in applications such as cutting and welding, as these latter lasers are either continuous wave or are pulsed with a pulse width greater than 200 ns.

← anx_II__cpt_1__cpt_1__table_4__row_4__cell_3 · All articles · anx_II__cpt_1__cpt_1__table_5__text_1 →

Source: EUR-Lex (Cellar) · retrieved 2026-11-10 · Text as adopted (Official Journal); later amendments are not incorporated in this text.