lexiara

2. Classification of waste as hazardous

2014/955/EU: Commission Decision of 18 December 2014 amending Decision 2000/532/EC on the list of waste pursuant to Directive 2008/98/EC of the European Parliament and of the Council Text with EEA relevance · European Union

Any waste marked with an asterisk (*) in the list of wastes shall be considered as hazardous waste pursuant to Directive 2008/98/EC, unless Article 20 of that Directive applies. For those wastes for which hazardous and non-hazardous waste codes could be assigned, the following shall apply: An entry in the harmonised list of wastes marked as hazardous, having a specific or general reference to 'hazardous substances', is only appropriate to a waste when that waste contains relevant hazardous substances that cause the waste to display one or more of the hazardous properties HP 1 to HP 8 and/or HP 10 to HP 15 as listed in Annex III to Directive 2008/98/EC. The assessment of the hazardous property HP 9 'infectious' shall be made according to relevant legislation or reference documents in the Member States. A hazardous property can be assessed by using the concentration of substances in the waste as specified in Annex III to Directive 2008/98/EC or, unless otherwise specified in Regulation (EC) No 1272/2008, by performing a test in accordance with Regulation (EC) No 440/2008 or other internationally recognised test methods and guidelines, taking into account Article 7 of Regulation (EC) No 1272/2008 as regards animal and human testing. Wastes containing polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/PCDF), DDT (1,1,1-trichloro-2,2-bis (4-chlorophenyl)ethane), chlordane, hexachlorocyclohexanes (including lindane), dieldrin, endrin, heptachlor, hexaclorobenzene, chlordecone, aldrine, pentachlorobenzene, mirex, toxaphene hexabromobiphenyl and/or PCB exceeding the concentration limits indicated in Annex IV to Regulation (EC) No 850/2004 of the European Parliament and of the Council Regulation (EC) No 850/2004 of the European parliament and of the Council of 29 April 2004 on persistent organic pollutants and amending Directive 79/117/EEC (OJ L 158, 30.4.2004, p. 7). shall be classified as hazardous. The concentration limits defined in Annex III to Directive 2008/98/EC do not apply to pure metal alloys in their massive form (not contaminated with hazardous substances). Those waste alloys that are considered as hazardous waste are specifically enumerated in this list and marked with an asterisk (*). Where applicable, the following notes included in Annex VI to Regulation (EC) No 1272/2008 may be taken into account when establishing the hazardous properties of wastes: 1.1.3.1. Notes relating to the identification, classification and labelling of substances: Notes B, D, F, J, L, M, P, Q, R, and U. 1.1.3.2. Notes relating to the classification and labelling of mixtures: Notes 1, 2, 3 and 5. After assessing the hazardous properties for a waste according to this method, an appropriate hazardous or non-hazardous entry from the list of wastes shall be assigned. All other entries in the harmonised list of wastes are considered non-hazardous.

· All articles ·

Source: EUR-Lex (Cellar) · retrieved 2026-11-10 · Text as adopted (Official Journal); later amendments are not incorporated in this text.