lexiara

3.

Directive 2014/32/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of measuring instruments (recast) Text with EEA relevance · European Union

The MPEs are defined as follows: For each of the fractions measured, the maximum error value permitted under rated operating conditions according to point 1.1 of Annex I is the greater of the two values shown in Table 2. Absolute values are expressed in % vol or ppm vol, percentage values are percent of the true value. Table 2 MPEs Parameter Class 0 Class I CO fraction ± 0,03 % vol ± 5 % ± 0,06 % vol ± 5 % CO_(2) fraction ± 0,5 % vol ±5 % ± 0,5 % vol ± 5 % HC fraction ± 10 ppm vol ± 5 % ± 12 ppm vol ± 5 % O_(2) fraction ± 0,1 % vol ± 5 % ± 0,1 % vol ± 5 % The MPE on lambda calculation is 0,3 %. The conventional true value is calculated according to the formula set out in point 5.3.7.3 of Regulation No 83 of the Economic Commission for Europe of the United Nations (UN/ECE) OJ L 42, 15.2.2012, p. 1. . For this purpose, the values displayed by the instrument are used for calculation.

· All articles ·

Source: EUR-Lex (Cellar) · retrieved 2026-11-06 · Text as adopted (Official Journal); later amendments are not incorporated in this text.