anx_III__cpt_1__cpt_10__cpt_4__text_3

Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment (recast) Text with EEA relevance · European Union

examine the technical documentation with respect to the design and the manufacturing procedures, assess the materials used where these are not in conformity with the relevant harmonised standards or with a European approval for pressure equipment materials, and check the certificate issued by the material manufacturer in accordance with point 4.3 of Annex I, approve the procedures for the permanent joining of parts or check that they have been previously approved in accordance with point 3.1.2 of Annex I, verify the qualifications or approvals required under points 3.1.2 and 3.1.3 of Annex I, carry out the final inspection referred to in point 3.2.1 of Annex I, perform or have performed the proof test referred to in point 3.2.2 of Annex I, and examine the safety devices, if applicable.

← anx_III__cpt_1__cpt_10__cpt_4__text_2 · All articles · anx_III__cpt_1__cpt_10__cpt_4__text_4 →

Source: EUR-Lex (Cellar) · retrieved 2026-11-02 · Text as adopted (Official Journal); later amendments are not incorporated in this text.