anx_III__cpt_1__cpt_12__cpt_3__item_2__text_4

the quality objectives and the organisational structure, responsibilities and powers of the management with regard to design and product quality, the technical design specifications, including standards, that will be applied and, where relevant harmonised standards will not be applied in full, the means that will be used to ensure that the essential safety requirements of the Directive that apply to the pressure equipment will be met, the design control and design verification techniques, processes and systematic actions that will be used when designing the pressure equipment pertaining to the pressure equipment type covered, particularly with regard to materials in accordance with point 4 of Annex I, the corresponding manufacturing, quality control and quality assurance techniques, processes and systematic actions that will be used, particularly the procedures for the permanent joining of parts as approved in accordance with point 3.1.2 of Annex I, the examinations and tests that will be carried out before, during and after manufacture, and the frequency with which they will be carried out, the quality records, such as inspection reports and test data, calibration data, reports concerning the qualifications or approvals of the personnel concerned, particularly those of the personnel undertaking the permanent joining of parts and the non-destructive tests in accordance with points 3.1.2 and 3.1.3 of Annex I, etc., the means of monitoring the achievement of the required design and pressure equipment quality and the effective operation of the quality system.

← anx_III__cpt_1__cpt_12__cpt_3__item_2__text_3 · All articles · 3.3. →

Source: EUR-Lex (Cellar) · retrieved 2026-11-02 · Text as adopted (Official Journal); later amendments are not incorporated in this text.