anx_III__cpt_1__cpt_12__cpt_4__item_2__text_2

Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment (recast) Text with EEA relevance · European Union

the name and address of the manufacturer, a written declaration that the same application has not been lodged with any other notified body, the technical documentation. The documentation shall make it possible to assess the conformity of the pressure equipment with the relevant requirements, and shall include an adequate analysis and assessment of the risk(s). The technical documentation shall specify the applicable requirements and cover, as far as relevant for the assessment, the design and operation of the pressure equipment. The technical documentation shall, wherever applicable, contain at least the following elements: a general description of the pressure equipment, conceptual design and manufacturing drawings and diagrams of components, sub-assemblies, circuits, etc., descriptions and explanations necessary for the understanding of those drawings and diagrams and the operation of the pressure equipment, a list of the harmonised standards the references of which have been published in the Official Journal of the European Union, applied in full or in part, and descriptions of the solutions adopted to meet the essential safety requirements of this Directive, where those harmonised standards have not been applied. In the event of partly applied harmonised standards, the technical documentation shall specify the parts which have been applied, results of design calculations made, examinations carried out, etc., and test reports, the supporting evidence for the adequacy of the technical design. This supporting evidence shall mention any documents that have been used, in particular where the relevant harmonised standards have not been applied in full, and shall include, where necessary, the results of tests carried out by the appropriate laboratory of the manufacturer or by another testing laboratory on his behalf and under his responsibility.

← anx_III__cpt_1__cpt_12__cpt_4__item_2__text_1 · All articles · 4.3. →

Source: EUR-Lex (Cellar) · retrieved 2026-11-02 · Text as adopted (Official Journal); later amendments are not incorporated in this text.