anx_III__cpt_1__cpt_3__cpt_1__point_3__text_3

Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment (recast) Text with EEA relevance · European Union

the name and address of the manufacturer and, if the application is lodged by the authorised representative, his name and address as well, a written declaration that the same application has not been lodged with any other notified body, the technical documentation. The technical documentation shall make it possible to assess the conformity of the pressure equipment with the applicable requirements of this Directive and shall include an adequate analysis and assessment of the risk(s). The technical documentation shall specify the applicable requirements and cover, as far as relevant for the assessment, the design, manufacture and operation of the pressure equipment. The technical documentation shall contain, wherever applicable, at least the following elements: a general description of the pressure equipment, conceptual design and manufacturing drawings and diagrams of components, sub-assemblies, circuits, etc., descriptions and explanations necessary for the understanding of those drawings and diagrams and the operation of the pressure equipment, a list of the harmonised standards the references of which have been published in the Official Journal of the European Union, applied in full or in part, and descriptions of the solutions adopted to meet the essential safety requirements of this Directive where those harmonised standards have not been applied. In the event of partly applied harmonised standards, the technical documentation shall specify the parts which have been applied, results of design calculations made, examinations carried out, etc., test reports, information concerning the tests provided for in manufacture, information concerning the qualifications or approvals required under points 3.1.2 and 3.1.3 of Annex I, the specimens representative of the production envisaged.

← anx_III__cpt_1__cpt_3__cpt_1__point_3__text_2 · All articles · anx_III__cpt_1__cpt_3__cpt_1__point_3__text_4 →

Source: EUR-Lex (Cellar) · retrieved 2026-11-02 · Text as adopted (Official Journal); later amendments are not incorporated in this text.