2.

Before placing on the market the pressure equipment or assemblies referred to in Article 4(1) and (2), importers shall ensure that the appropriate conformity assessment procedure in accordance with Article 14 has been carried out by the manufacturer. They shall ensure that the manufacturer has drawn up the technical documentation, that pressure equipment or assemblies bear the CE marking and are accompanied by instructions and safety information in accordance with points 3.3 and 3.4 of Annex I, and that the manufacturer has complied with the requirements set out in Article 6(5) and (6). Before placing on the market the pressure equipment or assemblies referred to in Article 4(3), importers shall ensure that the manufacturer has drawn up the technical documentation and that pressure equipment or assemblies are accompanied by adequate instructions for use and that the manufacturer has complied with the requirements set out in Article 6(5) and (6). Where an importer considers or has reason to believe that the pressure equipment or assembly is not in conformity with the essential safety requirements set out in Annex I, he shall not place the pressure equipment or assembly on the market until it has been brought into conformity. Furthermore, where the pressure equipment or assembly presents a risk, the importer shall inform the manufacturer and the market surveillance authorities to that effect.

← art_8__para_1__text_1 · All articles · art_8__para_2__text_1 →

Source: EUR-Lex (Cellar) · retrieved 2026-11-02 · Text as adopted (Official Journal); later amendments are not incorporated in this text.