6.2.

The EU type-examination certificate shall contain at least the following information: the name and identification number of the notified body; the name and address of the manufacturer and, if the application is lodged by the authorised representative, the latter's name and address; identification of the PPE covered by the certificate (type number); a statement that the PPE type complies with the applicable essential health and safety requirements; where harmonised standards have been fully or partially applied, the references of those standards or parts thereof; where other technical specifications have been applied, their references; where applicable, the performance level(s) or protection class of the PPE; for PPE produced as a single unit to fit an individual user, the range of permissible variations of relevant parameters based on the approved basic model; the date of issue, the date of expiry and, where appropriate, the date(s) of renewal; any conditions attached to the issue of the certificate; for category III PPE, a statement that the certificate shall only be used in conjunction with one of the conformity assessment procedures referred to in point (c) of Article 19.

← anx_V__cpt_1__cpt_6__item_1__text_2 · All articles · anx_V__cpt_1__cpt_6__item_2__text_1 →

Source: EUR-Lex (Cellar) · retrieved 2026-11-01 · Text as adopted (Official Journal); later amendments are not incorporated in this text.