doc__table__7 Text with EEA relevance. — Regulation (EU) 2018/858 of the European Parliament and of…

doctable7

Text with EEA relevance.

Regulation (EU) 2018/858 of the European Parliament and of the Council of 30 May 2018 on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles, amending Regulations (EC) No 715/2007 and (EC) No 595/2009 and repealing Directive 2007/46/EC (Text with EEA relevance.) · European Union

| Regulatory act reference | Annex and paragraphs | Specific conditions 3B | Regulation (EC) No 661/2009 UN Regulation No 58 | Paragraphs 2.3, 7.3. and 25.6 of UN Regulation No 58. | Dimensions and resistance to forces. 6A | Regulation (EC) No 661/2009 Regulation (EU) No 130/2012 | Annex II, Part 1 and 2 of Regulation (EU) No 130/2012. | Dimensions of steps, running boards and handholds. 6B | Regulation (EC) No 661/2009 UN Regulation No 11 | Annex 3 of UN Regulation No 11. Annex 4, paragraph 2.1. of UN Regulation No 11. Annex 5 of UN Regulation No 11. | Tensile strength tests and resistance of latches to acceleration. 8A | Regulation (EC) No 661/2009 UN Regulation No 46 | Paragraph 15.2.4. of UN Regulation No 46. | Prescribed fields of vision of rear-view mirrors. 12A | Regulation (EC) No 661/2009 UN Regulation No 21 | (a) Paragraphs 5. to 5.7. of UN Regulation No 21. | (a) Measurement of all radii of curvature and of all projections except for those requirements where a force has to be applied in order to check compliance with the provisions. (b) Paragraph 2.3. of UN Regulation No 21. | (b) Determination of the head-impact zone. 16A | Regulation (EC) No 661/2009 UN Regulation No 26 | Paragraph 5.2.4. of UN Regulation No 26 All provisions in paragraphs 5 (General requirements) and 6 (Particular requirements) of UN Regulation No 26. | Measurement of all radii of curvature and of all projections except for those requirements where a force has to be applied in order to check compliance with the provisions. 20A | Regulation (EC) No 661/2009 UN Regulation No 48 | Paragraph 6. (Individual specifications), and Annexes 4, 5 and 6 to UN Regulation No 48. | The test drive provided for in paragraph 6.22.9.2.2 shall be performed on a real vehicle. 27A | Regulation (EC) No 661/2009 Regulation (EU) No 1005/2010 | Annex II, point 1.2. of Regulation (EU) No 1005/2010. | Tractive and compressive static force. 32A | Regulation (EC) No 661/2009 UN Regulation No 125 | Paragraph 5 (Specifications) of UN Regulation No 125. | Obstructions and field of vision. 35A | Regulation (EC) No 661/2009 Regulation (EU) No 1008/2010 | Annex III, points 1.1.2. and 1.1.3. of Regulation (EU) No 1008/2010. | Determination of the swept area only. 37A | Regulation (EC) No 661/2009 Regulation (EU) No 1009/2010 | Annex II, point 2. of Regulation (EU) No 1009/2010. | Verification of the dimensional requirements. 42A | Regulation (EC) No 661/2009 UN Regulation No 73 | Paragraph 12.10 of UN Regulation No 73. | Resistance under a horizontal force and deflection measurement. 48A | Regulation (EC) No 661/2009 Regulation (EU) No 1230/2012 | (a) Annex I, Part B, points 7 and 8 of Regulation (EU) No 1230/2012. | (a) Check of compliance with the manoeuvrability requirements including manoeuvrability of vehicles fitted with lift- or loadable axles. (b) Annex I, Part C, points 6 and 7 of Regulation (EU) No 1230/2012. | (b) Measurement of the maximum rear swing-out. 49A | Regulation (EC) No 661/2009 UN Regulation No 61 | Paragraphs 5 and 6 of UN Regulation No 61. | Measurement of all radii of curvature and of all projections except for those requirements where a force has to be applied in order to check compliance with the provisions. 50A | Regulation (EC) No 661/2009 UN Regulation No 55 | (a) Annex 5 ‘Requirements for mechanical coupling devices’ of UN Regulation No 55. | (a) All provisions of paragraphs 1 to 8 included. (b) Annex 6, paragraph 1.1. of UN Regulation No 55. | (b) Strength tests on mechanicals couplings of simple design may be replaced by virtual tests. (c) Annex 6, paragraph 3 of UN Regulation No 55. | (c) Paragraphs 3.6.1. (Strength test), 3.6.2. (Resistance to buckling) and 3.6.3. (Resistance to bending moment) only. 52A | Regulation (EC) No 661/2009 UN Regulation No 107 | Annex 3 of UN Regulation No 107. | Paragraph 7.4.5. (calculation method). 52B | Regulation (EC) No 661/2009 UN Regulation No 66 | Annex 9 of UN Regulation No 66. | Computer simulation of rollover test on complete vehicle as an equivalent approval method. 57A | Regulation (EC) No 661/2009 UN Regulation No 93 | Annex 5, paragraph 3 of UN Regulation No 93. | Resistance under a horizontal force and deflection measurement.

← 1. List of regulatory acts · All articles · Appendix 3 →

Source: EUR-Lex (Cellar) · retrieved 2026-10-12 · Text as adopted (Official Journal); later amendments are not incorporated in this text.