lexiara

2.

The model shall be considered to comply with the applicable requirements if all the following conditions are met: the values given in the technical documentation pursuant to point 2 of Annex IV to Directive 2009/125/EC (declared values), and, where applicable, the values used to calculate those values, are not more favourable for the manufacturer, importer or authorised representative than the results of the corresponding measurements carried out pursuant to point 2(g) of that Annex; the declared values meet any requirements laid down in this Regulation, and any required product information published by the manufacturer, importer or authorised representative does not contain values that are more favourable for the manufacturer, importer or authorised representative than the declared values; when Member State authorities check the unit of the model the manufacturer, importer or authorised representative has put in place a system that complies with the requirements in the second paragraph of Article 6; when Member State authorities check the unit of the model, it complies with the functional requirements in point 2 of Annex III and with the information requirements in point 3 of Annex III; when Member State authorities test the unit of the model, the determined values (the values of the relevant parameters as measured in testing and the values calculated from those measurements) comply with the respective verification tolerances as set out in Table 1.

· All articles ·

Source: EUR-Lex (Cellar) · retrieved 2026-11-19 · Text as adopted (Official Journal); later amendments are not incorporated in this text.