Article 2
For the purposes of this Regulation, the following definitions apply: ‘electrical and electronic household and office equipment’ or ‘equipment’ means any energy-related product listed in Annex II which fulfils the following conditions: it is dependent on energy input from the mains power source in order to work as intended; it is designed for use with a nominal voltage rating of 250 V or below; ‘mains’ means the electricity supply from the grid of 230 (± 10 %) volts of alternating current at 50 Hz; ‘standby mode’ means a condition where the equipment is connected to the mains power source, depends on energy input from the mains power source to work as intended and provides only one or more of the following functions, which may persist for an indefinite time: reactivation function; reactivation function and only an indication of enabled reactivation function; information or status display; ‘reactivation function’ means a function that via a remote switch, a remote control, an internal sensor or timer provides a switch from standby mode to another mode, including active mode, providing additional functions; ‘main function’ means a function delivering the main service(s) for which the equipment is designed, tested and marketed, and which corresponds to the intended use of the equipment; ‘information or status display’ means a continuous function providing information or indicating the status of the equipment on a display, including clocks. A simple light indicator is not considered a status display; ‘active mode’ means a condition in which the equipment is connected to the mains power source and at least one of the main functions has been activated; ‘off mode’ means a condition in which the equipment is connected to the mains power source and is not providing any function, or it is in a condition providing only: an indication of off mode condition; functionalities intended to ensure electromagnetic compatibility under Directive 2014/30/EU of the European Parliament and of the Council (8); ‘network’ means a communication infrastructure with a topology of links, an architecture, including the physical components, organisational principles, communication procedures and formats (protocols); ‘networked standby’ means a condition in which the equipment is able to resume a function by way of a remotely initiated trigger from a network connection; ‘remotely initiated trigger’ means a signal that comes from outside the equipment via a network; ‘model identifier’ means a code, usually alphanumeric, which distinguishes a specific equipment model from other models with the same trade mark or the same manufacturer’s, importer’s or authorised representative’s name; ‘equivalent model’ means an equipment model which has the same technical characteristics relevant for the technical information to be provided in accordance with Annex II, but which is placed on the market or put into service by the same manufacturer, importer or authorised representative as another equipment model with a different model identifier; ‘declared values’ means the values provided by the manufacturer, importer or authorised representative for the stated, calculated or measured technical parameters in accordance with Article 4, for the verification of compliance by the Member State authorities.
← art_1__para · All articles · art_2__para →
Source: EUR-Lex (Cellar) · retrieved 2026-11-19 · Text as adopted (Official Journal); later amendments are not incorporated in this text.