lexiara

Article 4

1. The conformity assessment procedure referred to in Article 8 of Directive 2009/125/EC shall be the internal design control system set out in Annex IV to that Directive or the management system set out in Annex V to that Directive. 2. For the purposes of conformity assessment under Article 8 of Directive 2009/125/EC, the technical documentation shall contain the information set out in point 3(b) of Annex III to this Regulation and the details and results of the calculations made in accordance with Annex IV to this Regulation. 3. Where the information included in the technical documentation for that particular model has been obtained, alternatively: from a model that has the same technical characteristics relevant for the technical information to be provided in accordance with Annex III to this Regulation but is produced by a different manufacturer; by calculation on the basis of design or extrapolation from another model of the same or a different manufacturer, or both, the technical documentation for a model shall include the details and results of the calculations or extrapolations, the assessment made by the manufacturer to verify the accuracy of the calculations and, where appropriate, the declaration of identity between the models of different manufacturers. The technical documentation shall include a list of equivalent models referred to in the first and second subparagraph, including the model identifiers. 4. The technical documentation shall include the information listed in point 3(a) of Annex III to this Regulation.

· All articles ·

Source: EUR-Lex (Cellar) · retrieved 2026-11-19 · Text as adopted (Official Journal); later amendments are not incorporated in this text.