anx_III__table__4

| 4. | Cordless phones placed on the market with a charging cradle shall be tested for standby power consumption, with the following test settings: (a) Tests shall be performed with the charged handset placed on the charging cradle. (b) The devices shall be measured in the condition as delivered to the end–user (factory setting). (c) The power consumptions shall be measured as average power consumptions over a time period of 10 minutes. (d) The measurements shall to be carried out with a mains supply voltage of 230V ± 1 %. 5. Batteries of mobile phones and slate tablets shall be tested according to the default charging algorithms implemented by the manufacturer. The resulting number of cycles shall be rounded down to full hundreds and stated as “≥ x00”. 6. Ingress protection against particle and moisture ingress shall be expressed as an IP code, corresponding with the levels listed in Table 1. Tests shall be performed without protective cover. Table 1 Ingress protection rating levels Rating level Ingress of solid foreign objects Ingress of water with harmful effects Object size Protection against 2 Protected from touch by fingers and ≥12 mm water spray less than 15 degrees from vertical 3 ≥2,5 mm water spray less than 60 degrees from vertical 4 ≥1 mm splashing of water 5 dust-protected jetting of water 6 dust-tight powerful jetting of water 7 n.a. temporary immersion, 1 m depth 8 n.a. continuous immersion, 1 m or more depth

← anx_III__table__3 · All articles · anx_III__table__5 →

Source: EUR-Lex (Cellar) · retrieved 2026-11-03 · Text as adopted (Official Journal); later amendments are not incorporated in this text.