art_8__para_6

6. If modelling applications used in accordance with paragraphs 3 or 4 show an exceedance of any limit value or target value in an area of the zone that is not covered by fixed measurements and their area of spatial representativeness, at least one additional fixed or indicative measurement may be used at possible additional air pollution hotspots in the zone as identified by the modelling application. If modelling applications used in accordance with Article 9(3) show an exceedance of any limit value or target value in an area of the zone that is not covered by fixed measurements and their area of spatial representativeness, at least one additional fixed or indicative measurement shall be used at possible additional air pollution hotspots in the zone as identified by the modelling application. Where additional fixed measurements are used, those measurements shall be established within 2 calendar years after the exceedance was modelled. Where additional indicative measurements are used, those measurements shall be established within 1 calendar year after the exceedance was modelled. The measurements shall cover at least 1 calendar year in accordance with the minimum data coverage requirements set out in Point B of Annex V, to assess the concentration level of the relevant pollutant. Where a Member State chooses not to conduct any additional fixed or indicative measurements, the exceedance shown by modelling applications shall be used for air quality assessment.

← art_8__para_5__para · All articles · art_8__para_6__para →

Source: EUR-Lex (Cellar) · retrieved 2026-10-16 · Text as adopted (Official Journal); later amendments are not incorporated in this text.