anx_II__table__10

X.A.IX.001 | Chemical agents, including tear gas formulation containing 1 % or less of orthochlorobenzalmalononitrile (CS), or 1 % or less of chloroacetophenone (CN), except in individual containers with a net weight of 20 g or less; liquid pepper except when packaged in individual containers with a net weight of 85,05 g or less; smoke bombs; non-irritant smoke flares, canisters, grenades and charges; and other pyrotechnic articles having dual military and commercial use, and components specially designed therefor, other than those specified in the CML or in Regulation (EU) 2021/821. X.A.IX.002 | Fingerprinting powders, dyes, and inks. X.A.IX.003 | Protective and detection equipment not specially designed for military use and not controlled by 1A004 or 2B351 (15), as follows (see List of Items Controlled), and components not specially designed for military use and not controlled by 1A004 or 2B351 therefor: a. Personal radiation monitoring dosimeters; or b. Equipment limited by design or function to protect against hazards specific to civil industries, such as mining, quarrying, agriculture, pharmaceuticals, medical, veterinary, environmental, waste management, or to the food industry. Note: X.A.IX.003 does not control items for protection against chemical or biological agents that are consumer goods, packaged for retail sale or personal use, or medical products, such as latex exam gloves, latex surgical gloves, liquid disinfectant soap, disposable surgical drapes, surgical gowns, surgical foot covers, and surgical masks. X.A.IX.004 | Specific processing equipment, other than those specified in the CML or in Regulation (EU) 2021/821, as follows (see List of Items Controlled): a. Radiation detection, monitoring and measurement equipment, other than those specified in the CML or in Regulation (EU) 2021/821; or b. Radiographic detection equipment such as X-ray converters, and storage phosphor image plates. X.B.IX.001 | Specific processing equipment, other than those specified in the CML or in Regulation (EU) 2021/821, as follows (see List of Items Controlled): a. Electrolytic cells for fluorine production, other than those specified in the CML or in Regulation (EU) 2021/821; b. Particle accelerators; c. Industrial process control hardware/systems designed for power industries, other than those specified in the CML or in Regulation (EU) 2021/821; d. Freon and chilled water cooling systems capable of continuous cooling duties of 29,3 kW/hr or greater; or e. Equipment for the production of structural composites, fibres, prepregs and preforms. X.C.IX.001 | Separate chemically defined compounds according to Note 1 to Chapters 28 and 29 of the Combined Nomenclature: a. In concentrations of 95 % weight or greater, as follows: 1. Ethylene dichloride (CAS 107-06-2); 2. Nitromethane (CAS 75-52-5); 3. Picric acid (CAS 88-89-1); 4. Aluminium chloride (CAS 7446-70-0); 5. Arsenic (CAS 7440-38-2); 6. Arsenic trioxide (CAS 1327-53-3); 7. Bis(2-chloroethyl)ethylamine hydrochloride (CAS 3590-07-6); 8. Bis(2-chloroethyl)methylamine hydrochloride (CAS 55-86-7); 9. Tris(2-chloroethyl)amine hydrochloride (CAS 817-09-4); 10. Tributylphosphite (CAS 102-85-2); 11. Isocyanatomethane (CAS 624-83-9); 12. Quinaldine (CAS 91-63-4); 13. 2-bromochloroethane (CAS 107-04-0); 14. Benzil (CAS 134-81-6); 15. Diethyl ether (CAS 60-29-7); 16. Dimethyl ether (CAS 115-10-6); 17. Dimethylaminoethanol (CAS 108-01-0); 18. 2-methoxyethanol (CAS 109-86-4); 19. Butyrylcholinesterase (BCHE); 20. Diethylenetriamine (CAS 111-40-0); 21. Dichloromethane (CAS 75-09-2); 22. Dimethylaniline (CAS 121-69-7); 23. Ethyl bromide (CAS 74-96-4); 24. Ethyl chloride (CAS 75-00-3); 25. Ethylamine (CAS 75-04-7); 26. Hexamine (CAS 100-97-0); 27. Isopropanol (CAS 67- 63-0); 28. Isopropyl bromide (CAS 75-26-3); 29. Isopropyl ether (CAS 108-20-3); 30. Methylamine (CAS 74-89-5); 31. Methyl bromide (CAS 74-83-9); 32. Monoisopropylamine (CAS 75-31-0); 33. Obidoxime chloride (CAS 114-90-9); 34. Potassium bromide (CAS 7758-02-3); 35. Pyridine (CAS 110-86-1); 36. Pyridostigmine bromide (CAS 101-26-8); 37. Sodium bromide (CAS 7647-15-6); 38. Sodium metal (CAS 7440-23-5); 39. Tributylamine (CAS 102-82-9); 40. Triethylamine (CAS 121-44-8); or 41. Trimethylamine (CAS 75-50-3). b. In concentrations of 90 % weight or greater, as follows: 1. Acetone (CAS 67-64-1); 2. Acetylene (CAS 74-86-2); 3. Ammonia (CAS 7664-41-7); 4. Antimony (CAS 7440-36-0); 5. Benzaldehyde (CAS 100-52-7); 6. Benzoin (CAS 119-53-9); 7. 1-Butanol (CAS 71-36-3); 8. 2-Butanol (CAS 78-92-2); 9. Iso-Butanol (CAS 78-83-1); 10. Tert-Butanol (CAS 75-65-0); 11. Calcium carbide (CAS 75-20-7); 12. Carbon monoxide (CAS 630-08-0); 13. Chlorine (CAS 7782-50-5); 14. Cyclohexanol (CAS 108-93-0); 15. Dicyclohexylamine (CAS 101-83-7); 16. Ethanol (CAS 64-17-5); 17. Ethylene (CAS 74-85-1); 18. Ethylene oxide (CAS 75-21-8); 19. Fluoroapatite (CAS 1306-05-4); 20. Hydrogen chloride (CAS 7647-01-0); 21. Hydrogen sulfide (CAS 7783-06-4); 22. Mandelic acid (CAS 90-64-2); 23. Methanol (CAS 67-56-1); 24. Methyl chloride (CAS 74-87-3); 25. Methyl iodide (CAS 74-88-4); 26. Methyl mercaptan (CAS 74-93-1); 27. Monoethyleneglycol (CAS 107-21-1); 28. Oxalyl chloride (CAS 79-37-8); 29. Potassium sulphide (CAS 1312-73-8); 30. Potassium thiocyanate (CAS 333-20-0); 31. Sodium hypochlorite (CAS 7681-52-9); 32. Sulphur (CAS 7704-34-9); 33. Sulphur dioxide (CAS 7446-09-5); 34. Sulphur trioxide (CAS 7446-11-9); 35. Thiophosphoryl chloride (CAS 3982-91-0); 36. Tri-isobutyl phosphite (CAS 1606-96-8); 37. White phosphorus (CAS 12185-10-3); 38. Yellow phosphorus (CAS 7723-14-0); 39. Mercury (CAS 7439-97-6); 40. Barium chloride (CAS 10361-37-2); 41. Sulphuric acid (CAS 7664-93-9); 42. 3,3-dimethyl-1-butene (CAS 558-37-2); 43. 2,2-dimethylpropanal (CAS 630-19-3); 44. 2,2-dimethylpropylchloride (CAS 753-89-9); 45. 2-methylbutene (CAS 26760-64-5); 46. 2-chloro-3-methylbutane (CAS 631-65-2); 47. 2,3-dimethyl- 2,3-butanediol (CAS 76-09-5); 48. 2-methyl-2-butene (CAS 513-35-9); 49. Butyl lithium (CAS 109-72-8); 50. Bromo(methyl)magnesium (CAS 75-16-1); 51. Formaldehyde (CAS 50-00-0); 52. Diethanolamine (CAS 111-42-2); 53. Dimethylcarbonate (CAS 616-38-6); 54. Methyldiethanolamine hydrochloride (CAS 54060-15-0); 55. Diethylamine hydrochloride (CAS 660-68-4); 56. Diisopropylamine hydrochloride (CAS 819-79-4); 57. 3-Quinuclidinone hydrochloride (CAS 1193-65-3); 58. 3-Quinuclidinol hydrochloride (CAS 6238-13-7); 59. (R)-3- Quinuclidinol hydrochloride (CAS 42437-96-7); 60. N,N-Diethylaminoethanol hydrochloride (CAS 14426-20-1); 61. Dialkyl(≤C10) chlorophosphates; 62. Dialkyl(≤C10) fluorophosphates; 63. N,N-Methylisopropylacetamidine (CAS 1339185-57-7); 64. N,N-Methylethylacetamidine (CAS 1339632-40-4); 65. N,N-Ethylisopropylacetamidine(CAS 1339156-10-3); 66. N,N-Methylpropylacetamidine(CAS 1344238-28-3); 67. N,N-Ethylpropylacetamidine(CAS 1339737-43-7); 68. N,N-Isopropylpropylacetamidine(CAS 1341389-98-7); 69. N,N-Methylethylpropanamidine (CAS 1339424-26-8); 70. N,N-Ethylisopropylpropanamidine (CAS 1344354-09-1); 71. N,N-Methylpropylpropanamidine (CAS 1340216-25-2); 72. N,N-Ethylpropylpropanamidine (CAS 1341493-60-4); 73. N,N-Isopropylpropylpropanamidine (CAS 1343225-93-3); 74. N,N-Methylisopropylpropanamidine (CAS 1339042-55-5); 75. N,N-Methylethylbutanamidine (CAS 1341049-51-1); 76. N,N-Methylpropylbutanamidine (CAS 1343721-02-7); 77. N,N-Ethylpropylbutanamidine (CAS 1343806-12-1); 78. N,N-Isopropylpropylbutanamidine (CAS 1343316-02-8); 79. N,N-Methylisopropylbutanamidine (CAS 1340219-94-4); 80. N,N-Ethylisopropylbutanamidine (CAS 1342204-10-7); 81. N,N-Methylethylisobutanamidine (CAS 1342365-47-2); 82. N,N-Ethylpropylisobutanamidine (CAS 1342566-58-8); 83. N,N-Methylpropylisobutanamidine (CAS 1342270-21-6); 84. N,N-Isopropylpropylisobutanamidine (CAS 1342156-11-9); 85. N,N-Methylisopropylisobutanamidine (CAS 1341992-96-8); 86. N,N-Ethylisopropylisobutanamidine (CAS 1339048-76-8); 87. N,N-Dimethylacetamidine hydrobromide (CAS 1801188-12-4); 88. N,N-Dimethylacetamidine hydrochloride (CAS 2909-15-1); 89. N,N-Diethylacetamidine hydrochloride (CAS 91400-32-7); 90. N,N-Diethylacetamidine hydrobromide (CAS 78053-54-0); 91. N,N-Dimethylpropanamidine dihydrochloride (CAS 79972-73-9); or 92. N,N-Dimethylpropanamidine hydrochloride (CAS 56776-15-9). X.C.IX.002 | Fentanyl and its derivatives Alfentanil, Sufentanil, Remifentanil, Carfentanil, and salts thereof. Note: X.C.IX.002 does not control products identified as consumer goods packaged for retail sale for personal use or packaged for individual use. X.C.IX.003 | Chemical precursors to Central Nervous System Acting Chemicals, as follows: a. 4-anilino-N-phenethylpiperidine (CAS 21409-26-7); or b. N-phenethyl-4-piperidone (CAS 39742-60-4). Notes: 1. X.C.IX.003 does not control “chemical mixtures” containing one or more of the chemicals specified in entry X.C.IX.003 in which no individually specified chemical constitutes more than 1 % by the weight of the mixture. 2. X.C.IX.003 does not control products identified as consumer goods packaged for retail sale for personal use or packaged for individual use. X.C.IX.004 | Fibrous and filamentary materials, not controlled by 1C010 or 1C210 (16), for use in “composite” structures and with a specific modulus of 3,18 x 106 m or greater and a specific tensile strength of 7,62 x 104 m or greater. X.C.IX.005 | “Vaccines”, “immunotoxins”, “medical products”, “diagnostic and food testing kits”, as follows (see List of Items controlled): a. “Vaccines” containing, or designed for use against, items controlled by 1C351, 1C353 or 1C354; b. “Immunotoxins” containing items controlled by 1C351.d; or c. “Medical products” that contain any of the following: 1. “Toxins” controlled by 1C351.d (except for botulinum toxins controlled by 1C351.d.1, conotoxins controlled by 1C351.d.3, or items controlled for CW reasons under 1C351.d.4 or .d.5); or 2. Genetically modified organisms or genetic elements controlled by 1C353.a.3 (except for those that contain, or code for, botulinum toxins controlled by 1C351.d.1 or conotoxins controlled by 1C351.d.3); d. “Medical products” not controlled by X.C.IX.005.c that contain any of the following: 1. Botulinum toxins controlled by 1C351.d.1; 2. Conotoxins controlled by 1C351.d.3; or 3. Genetically modified organisms or genetic elements controlled by 1C353.a.3 that contain, or code for, botulinum toxins controlled by 1C351.d.1 or conotoxins controlled by 1C351.d.3; or e. “Diagnostic and food testing kits” containing items controlled by 1C351.d (except for items controlled for CW reasons under 1C351.d.4 or .d.5). Technical Notes: 1. “Medical products” are: (1) pharmaceutical formulations designed for testing and human (or veterinary) administration in the treatment of medical conditions, (2) prepackaged for distribution as clinical or medical products, and (3) approved by the European Medicines Agency (EMA) either to be marketed as clinical or medical products or for use as research new drug. 2. “Diagnostic and food testing kits” are specifically developed, packaged and marketed for diagnostic or public health purposes. Biological toxins in any other configuration, including bulk shipments, or for any other end-uses are controlled by 1C351. X.C.IX.006 | Commercial charges and devices containing energetic materials, other than those specified in the CML or in Regulation (EU) 2021/821, and nitrogen trifluoride in a gaseous state (see List of Items Controlled): a. Shaped charges specially designed for oil well operations, utilizing one charge functioning along a single axis, that upon detonation produce a hole, and 1. Contain any formulation of “controlled materials”; 2. Have only a uniform shaped conical liner with an included angle of 90 degrees or less; 3. Contain more than 0,010 kg but less than or equal to 0,090 kg of “controlled materials”; and 4. Have a diameter not exceeding 114,3 cm; b. Shaped charges specially designed for oil well operations containing less than or equal to 0,010 kg of “controlled materials”; c. Detonation cord or shock tubes containing less than or equal to 0,064 kg/m of “controlled materials”; d. Cartridge power devices, that contain less than or equal to 0,70 kg of “controlled materials” in the deflagration material; e. Detonators (electric or nonelectric) and assemblies thereof, that contain less than or equal to 0,01 kg of “controlled materials”; f. Igniters, that contain less than or equal to 0,01 kg of “controlled materials”; g. Oil well cartridges, that contain less than or equal to 0,015 kg of controlled “energetic materials”; h. Commercial cast or pressed boosters containing less than or equal to 1,0 kg of “controlled materials”; i. Commercial prefabricated slurries and emulsions containing less than or equal to 10,0 kg and less than or equal to 35 % by weight of ML8 “controlled materials”; j. Cutters and severing tools containing less than or equal to 3,5 kg of “controlled materials”; k. Pyrotechnic devices when designed exclusively for commercial purposes (e.g., theatrical stages, motion picture special effects, and fireworks displays) and containing less than or equal to 3,0 kg of “controlled materials”; l. Other commercial explosive devices and charges not controlled by X.C.IX.006.a through .k containing less than or equal to 1,0 kg of “controlled materials”; or Note: X.C.IX.006.l includes automotive safety devices; extinguishing systems; cartridges for riveting guns; explosive charges for agricultural, oil and gas operations, sporting goods, commercial mining, or public works purposes; and delay tubes used in the assembly of commercial explosive devices. m. Nitrogen trifluoride (NF3) in a gaseous state. Notes: 1. “Controlled materials” means controlled energetic materials (see 1C011, 1C111, 1C239 or ML8). 2. Nitrogen trifluoride when not in a gaseous state is controlled under ML8.d by the CML. X.C.IX.007 | Mixtures not controlled by 1C350 or 1C450 (17) that contain chemicals controlled by 1C350 or 1C450 and medical, analytical, diagnostic, and food testing kits not controlled by 1C350 or 1C450 that contain chemicals controlled by 1C350, as follows (see List of Items Controlled): a. Mixtures containing the following concentrations of precursor chemicals controlled by 1C350: 1. Mixtures containing 10 % or less, by weight, of any single CWC Schedule 2 chemical controlled by 1C350; 2. Mixtures containing less than 30 %, by weight, of: a. Any single CWC Schedule 3 chemical controlled by 1C350; or b. Any single non-CWC precursor chemical controlled by 1C350; b. Mixtures containing the following concentrations of toxic or precursor chemicals controlled by 1C450: 1. Mixtures containing the following concentrations of CWC Schedule 2 chemicals controlled by 1C450: a. Mixtures containing 1 % or less, by weight, of any single CWC Schedule 2 chemical controlled by 1C450.a.1 and a.2 (i.e., mixtures containing Amiton or PFIB); or b. Mixtures containing 10 % or less, by weight, of any single CWC Schedule 2 chemical controlled by 1C450.b.1, b.2, b.3, b.4, b.5, or b.6; 2. Mixtures containing less than 30 %, by weight, of any single CWC Schedule 3 chemical controlled by 1C450.a.4, a.5., a.6., a.7, or 1C450.b.8; c. “Medical, analytical, diagnostic, and food testing kits” that contain precursor chemicals controlled by 1C350 in an amount not exceeding 300 grams per chemical. Technical Note: For the purpose of this entry, “medical, analytical, diagnostic, and food testing kits” are pre-packaged materials of defined composition that are specifically developed, packaged and marketed for medical, analytical, diagnostic, or public health purposes. Replacement reagents for medical, analytical, diagnostic, and food testing kits described in X.C.IX.007.c are controlled by 1C350 if the reagents contain at least one of the precursor chemicals identified in that entry in concentrations equal to or greater than the control levels for mixtures indicated in 1C350. X.C.IX.008 | Non-fluorinated polymeric substances, not controlled by 1C008 (18), as follows (see List of Items Controlled): a. Polyarylene ether ketones, as follows: 1. Polyether ether ketone (PEEK); 2. Polyether ketone ketone (PEKK); 3. Polyether ketone (PEK); or 4. Polyether ketone ether ketone ketone (PEKEKK); b. Not used. X.C.IX.009 | Specific materials, other than those specified in the CML or in Regulation (EU) 2021/821, as follows (see List of Items Controlled): a. Hardened steel and tungsten carbide precision ball bearings (3 mm or greater diameter); b. 304 and 316 stainless steel plate, other than those specified in the CML or in Regulation (EU) 2021/821; c. Monel plate; d. Tributyl phosphate (CAS 126-73-8); e. Nitric acid (CAS 7697-37-2) in concentrations of 20 % weight or greater; f. Fluorine (CAS 7782-41-4); or g. Alpha-emitting radionuclides, other than those specified in the CML or in Regulation (EU) 2021/821. X.C.IX.010 | Aromatic polyamides (aramids) not controlled by 1C010, 1C210 or X.C.IX.004, presented in any of the following forms (see List of Items Controlled): a. Primary forms; b. Filament yarn or monofilaments; c. Filament tows; d. Rovings; e. Staple or chopped fibres; f. Fabrics; g. Pulp or flocks. X.C.IX.011 | Nanomaterials as follows (see List of Items Controlled): a. Semiconductor nanomaterials; b. Composite-based nanomaterials; or c. Any of the following carbon-based nanomaterials: 1. Carbon nanotubes; 2. Carbon nanofibres; 3. Fullerenes; 4. Graphenes; or 5. Carbon onions. Notes: For the purpose of X.C.IX.011, nanomaterial means a material that meets at least one of the following criteria: 1. Consists of particles, with one or more external dimensions in the size range 1 - 100 nm for more than 1 % of their number size distribution; 2. Has internal or surface structures in one or more dimensions in the size range 1 - 100 nm; or 3. Has a specific surface area by volume greater than 60 m2/cm3, excluding materials consisting of particles with a size lower than 1 nm. X.C.IX.012 | Rare-earth metals and compounds, either in organic or inorganic form, including mixtures whether or not intermixed or interalloyed. Note 1: Rare-earth metals and compounds include Scandium, Yttrium, Lanthanum, Cerium, Praseodymium, Neodymium, Promethium, Samarium, Europium, Gadolinium, Terbium, Dysprosium, Holmium, Erbium, Thulium, Ytterbium and Lutetium; Note 2: For the purpose of the control X.C.IX.012 minerals containing rare-earth metals are excluded; Note 3: X.C.IX.012 does not control mixtures in which no individually metal or compound specified in this entry constitutes more than 5 % by the weight of the mixture. X.C.IX.013 | Tungsten, tungsten carbide and alloys, not controlled by 1C117 or 1C226 (19), containing more than 90 % tungsten by weight. Note 1: For the purpose of the control X.C.IX.013, wire is excluded Note 2: For the purpose of the control X.C.IX.013, surgical or medical instruments are excluded. X.C.IX.014 | Lithium and lithium compounds, as follows: a. Lithium (CAS 7439-93-2); b. Lithium carbonate (CAS 554-13-2); c. Lithium hydroxide (CAS 1310-65-2 and CAS 1310-66-3); d. Lithium oxide (CAS 12057-24-8); e. Lithium cobalt oxide (CAS 12190-79-3); f. Lithium iron phosphate (CAS 15365-14-7); g. Lithium manganese oxide (CAS 12057-17-9); h. Lithium nickel manganese cobalt oxide (CAS 346417-97-8); or i. Lithium titanate (CAS 12031-82-2). X.C.IX.015 | Ultra-High-Molecular-Weight Polyethylene (UHMWPE), not controlled by 1C010 or 1C210 (20), presented in any of the following forms: a. Primary forms; b. Filament yarn or monofilaments; c. Filament tows; d. Rovings; e. Staple or chopped fibres; f. Fabrics; g. Pulp or flocks. X.D.IX.001 | Specific “software”, other than those specified in the CML or in Regulation (EU) 2021/821, as follows (see List of Items Controlled): a. “Software” specially designed for industrial process control hardware/systems controlled by X.B.IX.001, other than those specified in the CML or in Regulation (EU) 2021/821; or b. “Software” specially designed for equipment for the production of structural composites, fibres, prepregs and preforms controlled by X.B.IX.001, other than those specified in the CML or in Regulation (EU) 2021/821. X.E.IX.001 | “Technology” for the “development”, “production”, or “use” of fibrous and filamentary materials controlled by X.C.IX.004 and X.C.IX.010. X.E.IX.002 | “Technology” for the “development”, “production”, or “use” of nanomaterials controlled by X.C.IX.011.

← Category IX – Special Materials and Related Equipment · All articles · Category X – Materials Processing →

Source: EUR-Lex (Cellar) · retrieved 2026-10-17 · Text as adopted (Official Journal); later amendments are not incorporated in this text.