art_4__para_5

5. In the delegated acts referred to in paragraph 1 of this Article, the Commission shall supplement this Regulation by specifying the applicable conformity assessment procedures from either module A set out in Annex IV to this Regulation or one of the modules B to H1 set out in Annex II to Decision No 768/2008/EC, with the adaptations necessary in view of the product or ecodesign requirements concerned, in accordance with Article 43 of this Regulation. Where different conformity assessment modules in Annex II to Decision 768/2008/EC are to be used pursuant to other Union law for the same product, the module provided for in the delegated acts referred to in paragraph 1 shall be used for the ecodesign requirement concerned. When this Regulation, where appropriate, applies to a product group in a manner complementary to a Regulation of the European Parliament and of the Council laying down harmonised conditions for the marketing of construction products (the ‘construction products Regulation’), the delegated act adopted pursuant to paragraph 1 shall specify the conformity assessment procedure, including, where appropriate, any systems provided for pursuant to a measure under the construction products Regulation, taking into account the characteristics of the product group, the relevant ecodesign requirements and the cost for economic operators.

← art_4__para_4 · All articles · art_4__para_5__para →

Source: EUR-Lex (Cellar) · retrieved 2026-10-12 · Text as adopted (Official Journal); later amendments are not incorporated in this text.