anx_III__table__137

X.B.X.005 | Non-“numerically controlled” machine tools for generating optical quality surfaces, (see List of Items Controlled) and specially designed components therefor: a. Turning machines using a single point cutting tool and having all of the following characteristics: 1. Slide positioning accuracy less (better) than 0,0005 mm per 300 mm of travel; 2. Bidirectional slide positioning repeatability less (better) than 0,00025 mm per 300 mm of travel; 3. Spindle “run-out” and “camming” less (better) than 0,0004 mm total indicator reading (TIR); 4. Angular deviation of the slide movement (yaw, pitch and roll) less (better) than 2 seconds of arc, TIR, over full travel; and 5. Slide perpendicularity less (better) than 0,001 mm per 300 mm of travel; Technical Note: The bidirectional slide positioning repeatability (R) of an axis is the maximum value of the repeatability of positioning at any position along or around the axis determined using the procedure and under the conditions specified in part 2.11 of ISO 230/2: 1988. b. Fly cutting machines having all of the following characteristics: 1. Spindle “run-out” and “camming” less (better) than 0,0004 mm TIR; and 2. Angular deviation of slide movement (yaw, pitch and roll) less (better) than 2 seconds of arc, TIR, over full travel.

← anx_III__table__136 · All articles · anx_III__table__138 →

Source: EUR-Lex (Cellar) · retrieved 2026-10-15 · Text as adopted (Official Journal); later amendments are not incorporated in this text.