ANNEX V

| 1. | A non-technical description of the actions planned to ensure that the vehicles meet the requirements of Articles 4 to 7 throughout their production. | 2. | A non-technical description of procedures implemented by the manufacturer to: (a) collect the data through the full supply chain relevant for meeting the requirements of Articles 4 to 7; (b) check and verify the information received from suppliers; (c) react adequately where the data received from the suppliers indicate a risk of non-compliance with the requirements of Article 4, 5 or 6. | 3. | Information on end-of-life treatment technologies in place, expected technological progress in end-of-life treatment technologies and capacity investment in such technologies, that the manufacturer used in order to calculate the reusability, recyclability and recoverability in accordance with Article 4 of their vehicle types. | 4. | Information on the share of recycled content in vehicles as referred to in Articles 6 and 10. | 5. | A list of actions that the manufacturer commits to carry out in order to ensure that the treatment of end-of-life vehicles is carried out in accordance with this Regulation, with a particular focus on: (a) measures designed to facilitate removal of parts indicated in Part C of Annex VIII; (b) measures to address the challenges posed by the use of materials and techniques which hamper easy dismantling or which make recycling very challenging; (c) measures to promote the reuse of parts and components; (d) research and development activities, investments in the development of recycling technologies or infrastructure, as well as cooperation with waste management operators, conducted in order to implement the actions referred to in points (a) to (c). | 1. | The manufacturers shall provide an update of the circularity strategy at least every five years. | 2. | The updated circularity strategy shall include the relevant changes and in particular the following: (a) a description of how the actions referred to in point 5 of Part A have been undertaken, together with an assessment of their effectiveness, and, where one or more actions indicated in the strategy has not been conducted, an explanation of the reasons for this; (b) information about the significant changes in the design and production undertaken by the manufacturer to improve the circularity of vehicles.

← anx_IV__table · All articles · CIRCULARITY STRATEGY →

Source: EUR-Lex (Cellar) · retrieved 2026-10-14 · Text as adopted (Official Journal); later amendments are not incorporated in this text.