(Text with EEA relevance)

Regulation (EU) 2026/1738 of the European Parliament and of the Council of 8 July 2026 on circularity requirements for vehicle design and on management of end-of-life vehicles, amending Regulations (EU) No 168/2013, (EU) 2018/858, (EU) 2019/1020 and (EU) 2023/1542 and repealing Directives 2000/53/EC and 2005/64/EC (Text with EEA relevance) · European Union

CHAPTER I GENERAL PROVISIONS CHAPTER II CIRCULARITY REQUIREMENTS CHAPTER III OBLIGATIONS OF MANUFACTURERS CHAPTER IV MANAGEMENT OF END-OF-LIFE OF VEHICLES SECTION 1 General provisions SECTION 2 Extended Producer Responsibility SECTION 3 Collection of end-of-life vehicles SECTION 4 Treatment of end-of-life vehicles CHAPTER V TRANSFER OF OWNERSHIP AND DISTINCTION BETWEEN USED VEHICLES AND END-OF-LIFE VEHICles CHAPTER VI EXPORT OF USED VEHICLES TO THIRD COUNTRIES CHAPTER VII ENFORCEMENT CHAPTER VIII DELEGATED POWERS AND COMMITTEE PROCEDURE CHAPTER IX AMENDMENTS CHAPTER X FINAL PROVISIONS This Regulation shall be binding in its entirety and directly applicable in the Member States. Done at Strasbourg, 8 July 2026. For the European Parliament The President R. METSOLA For the Council The President T. BYRNE ELI: http://data.europa.eu/eli/reg/2026/1738/oj ISSN 1977-0677 (electronic edition)

← on circularity requirements for vehicle design and on management of end-of-life vehicles, amending Regulations (EU) No 168/2013, (EU) 2018/858, (EU) 2019/1020 and (EU) 2023/1542 and repealing Directives 2000/53/EC and 2005/64/EC · All articles · Preamble →

Source: EUR-Lex (Cellar) · retrieved 2026-10-14 · Text as adopted (Official Journal); later amendments are not incorporated in this text.