Commission Regulation (EU) No 109/2011 of 27 January 2011 implementing Regulation…

Commission Regulation (EU) No 109/2011 of 27 January 2011 implementing Regulation (EC) No 661/2009 of the European Parliament and of the Council as regards type-approval requirements for certain categories of motor vehicles and their trailers as regards spray suppression systems Text with EEA relevance

regulation · European Union · 32011R0109

303 provisions in 444 nodes

Defined terms · All instruments · document · documentation · guarantee · import · information · market · mass media · property tax

Table

COMMISSION REGULATION (EU) No 109/2011

of 27 January 2011

implementing Regulation (EC) No 661/2009 of the European Parliament and of the Council as regards type-approval requirements for certain categories of motor vehicles and their trailers as regards spray suppression systems

(Text with EEA relevance)

Article 2 Definitions

Article 3 EC type-approval of a vehicle with regard to spray suppression systems

Subparagraph

Article 4 EC separate technical unit type-approval of spray suppression systems

Subparagraph

Article 5 EC separate technical unit type-approval mark

Subparagraph

Article 6 Validity and extension of approvals granted under Directive 91/226/EEC

Subparagraph

Article 7 Entry into force

Subparagraph

Note

ANNEX I

ADMINISTRATIVE DOCUMENTS FOR EC TYPE-APPROVAL OF VEHICLES WITH REGARD TO THEIR SPRAY SUPPRESSION SYSTEMS

1. GENERAL CONSTRUCTION CHARACTERISTICS OF THE VEHICLE

Subparagraph

2. MASSES AND DIMENSIONS(f)(g)

(in kg and mm) (Refer to drawing where applicable)

(maximum format: A4 (210 × 297 mm))

EC TYPE-APPROVAL CERTIFICATE

to EC type-approval certificate No

Subparagraph

ANNEX II

ADMINISTRATIVE DOCUMENTS FOR EC TYPE-APPROVAL OF SPRAY SUPPRESSION SYSTEMS AS SEPARATE TECHNICAL UNITS

1. DESCRIPTION OF THE DEVICE

Subparagraph

PART 2

MODEL

(maximum format: A4 (210 × 297 mm))

EC TYPE-APPROVAL CERTIFICATE

to EC type-approval certificate No

1. Additional information

Subparagraph

PART 3

EC separate technical unit type-approval mark

Subparagraph

Example of EC separate technical unit type-approval mark

Requirements for spray suppression devices

0. GENERAL SPECIFICATIONS

Subparagraph

1. TESTS TO BE CARRIED OUT

Subparagraph

2. APPLICATION FOR EC COMPONENT TYPE-APPROVAL

Tests on spray-suppression devices of the energy-absorber type

Test on spray-suppression devices of the air/water separator type

Requirements for type-approval of vehicles with regard to their spray suppression systems

2.1. Retractable axles

Subparagraph

2.2. Self-tracking axles

Subparagraph

3. POSITION OF OUTER VALANCE

5. SPRAY-SUPPRESSION SYSTEMS

Subparagraph

SPECIFIC REQUIREMENTS

Mechanical suspension

Conformity of production and cessation of production

1. Conformity of production

Table

2. Cessation of production

Width (q) of mudguard (a) and position of valance (j)

Subparagraph

Figure 1b

Example of measurement of the outer valance

Figure 2

Dimensions of mudguard and outer valance

Subparagraph

Figure 3

Position of mudguard and rain flap

Subparagraph

Figure 4

Diagram showing assembly of a spray-suppression system (mudguard, rain flap, outer valance) incorporating spray-suppression devices (energy absorbers) for multiple axles

Figure 5

Diagram showing assembly of a spray-suppression system incorporating spray-suppression devices (energy absorbers) for axles fitted with non-steered or self-steering wheels

(Annex IV – points 5.2 and 7)

Figure 6

Diagram showing assembly of a spray-suppression system incorporating spray-suppression devices fitted with air/water separators for axles fitted with steered, self-steering or non-steered wheels

Subparagraph

Figure 7

Diagram showing assembly of a spray-suppression system incorporating spray-suppression devices (mudguard, rain flap, outer valance) for multiple axles where the distance between the tyres does not exceed 300 mm

Subparagraph

Figure 8

Test assembly for energy absorption spray-suppression devices

(Annex III, PART 2)

Subparagraph

Figure 9

Test assembly for air/water separator spray-suppression devices

(Annex III, PART 3)