3.
TEST CONDITIONS 3.1. Vehicle or engine 3.1.1. The engine or the vehicle shall be submitted in good mechanical condition. The engine shall have been run in. 3.1.2. The engine shall be tested with the equipment described in Annex II. 3.1.3. The settings of the engine shall be those described by the manufacturer and by Annex II. 3.1.4. The exhaust device shall not have any orifice through which the gases emitted by the engine might be diluted. 3.1.5. The engine shall be in the normal working condition prescribed by the manufacturer. In particular, the cooling water and the oil shall each be at the normal temperature indicated by the manufacturer. 3.2. Fuel The fuel shall be the reference fuel whose specifications are given in Annex V. 3.3. Test laboratory 3.3.1. The absolute temperature T of the laboratory, expressed in degrees Kelvin, and the atmospheric pressure H, expressed in torr, shall be measured, and the factor F shall be determined by the formula 3.3.2. >PIC FILE= "T0010771"> 3.4. Sampling and measuring apparatus The light-absorption coefficient of the exhaust gases shall be measured with an opacimeter satisfying the conditions laid down in Annex VII and installed in conformity with Annex VIII.
← anx_III__para_2__continuation__3 · All articles · 4. →
Source: EUR-Lex (Cellar) · retrieved 2026-11-22 · Text as adopted (Official Journal); later amendments are not incorporated in this text.