anx_IV__para__14
6.1.2. The front side of the rear part of the mudguard must be fitted with a spray-reduction device complying with the specifications set out in Part 2 of Annex III. This material must cover the inside of the mudguard up to a height determined by a straight line running from the centre of the wheel and forming an angle of at least 30° with the horizontal (Figure 3 of Annex VI).
← (c) · All articles · anx_IV__para__15 →
Source: EUR-Lex (Cellar) · retrieved 2026-11-12 · Text as adopted (Official Journal); later amendments are not incorporated in this text.